d250x550v-f-/250x750v-f-mini-lathe-machine-for-metal-manual-lathe-machine, d250x550v-f-/250x750v-f-mini-lathe-machine-for-metal-manual-lathe-machine, /bench-lathe
EN
The D250X550V-F mini lathe offers a 250mm swing, 1,100W maintenance-free DC motor with 50–2,000 rpm variable speed, spindle concentricity below 0.009mm, quench-hardened cast iron bed, and dual metric/imperial thread cutting for precision metal turning.
The D250X550V-F / D250X750V-F mini lathe machine for metal is a variable-speed precision turning lathe suited to small workshops, engineering labs, and educational facilities. It offers a 250 mm swing over the bed, a 1,100 W maintenance-free DC motor, and stepless speed control from 50 to 2,000 rpm. Two bed lengths — 550 mm and 750 mm between centers — let buyers choose the configuration that fits their workspace and workpiece range.
In practice, the low end of the speed range matters more than the ceiling for most metal-turning jobs. The D250X550V-F mini lathe machine for metal holds steady torque through threading passes and facing cuts on harder alloys, where controlled force is more critical than maximum rpm.



The spindle is quenched and precision-ground, holding concentricity error below 0.009 mm and chuck runout accuracy below 0.05 mm. Shops regularly producing cnc turned parts or close-tolerance fittings will notice consistent roundness across a production run. Spindle taper: MT4. Tailstock taper: MT2. The spindle aperture is 26 mm — sufficient for most bar stock sizes used in small-batch turning work.
Higher maximum spindle speed does not equal better performance when turning steel or cast iron — torque and structural rigidity are what actually drive quality results. The D250X550V-F mini lathe machine for metal uses a maintenance-free 1,100 W DC motor with stepless control from 50 to 2,000 rpm. The brushless design eliminates routine brush replacement. For a workshop switching between mild steel shafts and aluminum spacers in the same session, the variable speed eliminates mechanical change-overs. Buyers who have compared this against a mini cnc mill for metal for light metal work will find the lathe more appropriate for cylindrical turning and thread cutting.
The bed is cast iron, quench-hardened and precision-ground. Max lateral tool holder travel: 115 mm. Max longitudinal travel (small tool holder): 70 mm. Max tailstock sleeve displacement: 70 mm. The gearbox supports 18 metric pitches (0.2–3.5 mm) and 18 inch pitches (8–56 TPI). This dual-system thread cutting is a practical advantage for job shops producing cnc turned parts and custom fittings to mixed metric and imperial standards in the same facility.
| Parameter | Value |
|---|---|
| Max. turning diameter over bed | 250 mm |
| Distance between centers | 550 mm / 750 mm |
| Max. slewing diameter on middle pallet | 150 mm |
| Spindle aperture / taper | 26 mm / MT4 |
| Tailstock taper | MT2 |
| Max. lateral / longitudinal travel | 115 mm / 70 mm |
| Metric threads / Inch threads | 18 pitches (0.2–3.5 mm) / 18 pitches (8–56 TPI) |
| Feed rates | Transverse 0.08–0.32 mm/r; Longitudinal 0.034–0.105 mm/r |
| Spindle speed range | 50–2,000 rpm (variable) |
| Motor power | 1,100 W (DC, maintenance-free) |
| Net weight / Gross weight | 140/160 kg / 165/185 kg |
| Packing size | 1,320/1,500 × 570 × 610 mm |
Standard accessories ship with the machine. Optional accessories for this mini lathe machine for metal include: Four Jaw Chuck, Follow Rest, Steady Rest, Face Plate, Live Center, Stand, Turning Tools, Back Plate, Drill Chuck Arbor, and Thread Dial Indicator. Follow and steady rests add support for long shafts prone to deflection under cutting load.

This D250X550V-F mini lathe machine for metal suits shops turning shafts, bushings, threaded fittings, and flanges. On-machine thread cutting in both metric and imperial reduces reliance on outsourced threading. Shops supplying cnc turned parts regularly benefit from the dual-pitch gearbox, which enables finish threading passes without removing the workpiece from the chuck.
Direct manual control over spindle speed and feed rate makes this lathe suitable for teaching metal removal fundamentals and for rapid prototype turning in engineering labs. Students observe the direct link between cutting parameters and surface finish without CNC-layer abstraction.
The machine is rated for metal, wood, and jade. The 50–2,000 rpm variable range covers mild steel, stainless steel, aluminum, brass, cast iron, and — at lower speeds with coolant — jade and dense hardwood. For buyers who need a versatile manual turning machine rather than a single-purpose tool, this range is a practical advantage.
International buyers should allow two to four weeks beyond the quoted lead time for customs clearance and freight scheduling. A 140–160 kg machine in an export crate encounters port and inland logistics delays that can move the actual installation date significantly.
When comparing options: buyers evaluating this manual mini lathe machine for metal alongside a mini cnc mill for metal should prioritise their primary workpiece geometry. A manual lathe excels at rotational symmetry — shafts, bores, threads, tapers. A combination brake lathe serves brake disc resurfacing. If you see haas mill for sale listings alongside lathe options, note that vertical machining centres are optimised for prismatic work, not cylindrical turning. For cylindrical turning with thread cutting, the D250X550V-F manual lathe is correctly scoped for this application range.
The D250X550V-F mini lathe machine for metal carries CE certification, confirming compliance with European machinery safety directives. The manufacturing facility is in the Chizhou industrial base, Anhui, with integrated casting, machining, assembly, and quality inspection capability. Critical transmission components are sourced from established suppliers.



The D250X550V-F mini lathe offers a 250mm swing, 1,100W maintenance-free DC motor with 50–2,000 rpm variable speed, spindle concentricity below 0.009mm, quench-hardened cast iron bed, and dual metric/imperial thread cutting for precision metal turning.