product-at300-multi-purpose-metal-lathe-machine/mini-combination-metal-lathe, product-at300-multi-purpose-metal-lathe-machine/mini-combination-metal-lathe, /combination-machine
EN
This combination machine combines turning, drilling and milling functions in one bench-mounted platform. This makes it a practical option when a workshop needs several conventional machining operations without dedicating floor space to separate machines. The supplied information identifies the AT300-2 and AT300-5 versions, so buyers should confirm the selected version before ordering.
The listed maximum swing over bed is 300 mm, maximum workpiece length is 470 mm, and maximum swing over the tool carrier is 140 mm. The spindle bore is 26 mm, while the cross stroke over the tool carrier is listed as 160 mm. These are selection figures, not a substitute for reviewing your actual part drawing, tooling and workholding arrangement.
The published threading data lists 14 metric thread kinds with a 0.5–3 mm pitch range and 20 inch thread kinds with an 11–40 1/n range as presented in the source specification. Longitudinal feed is listed as 0.075–0.15/r. Confirm the required thread standard, pitch and setup method with the machine documentation before planning production work.
The machine has a maximum drilling capacity of 15 mm. The milling spindle taper is No. 3 and the listed spindle-hole stroke is 80 mm. The headstock can swivel around the column through 360 degrees according to the supplied table. These details help a buyer compare setup access for drilling and light milling tasks, but fixture clearance should be checked for every workpiece.
Published data shows a lathe spindle speed range of 160–1600 r/min in six steps and a milling speed range of 125–1600 r/min in 12 steps. Higher speed is not automatically the better choice: material, tool diameter, workholding stiffness and the required finish all influence a suitable setting.
The source information distinguishes AT300-2 and AT300-5 by tool-carrier length: 200 mm for AT300-2 and 425 mm for AT300-5. The bench dimensions are listed as 200 × 150 for AT300-2 and 425 × 150 for AT300-5; net weights are 160 kg and 180 kg respectively. Quote requests should state the preferred model rather than assuming the figures apply interchangeably.
The lathe spindle taper is listed as No. 4 and the tailstock taper as No. 3. A 3-jaw chuck, dead centers, Allen wrench, single open-end wrench, double open-end wrench, drill chuck arbor, tapered drift and drill chuck appear in the supplied standard-accessory list. Check the final packing list because supplied accessories may depend on the version or order configuration.
The stated overall dimensions are 1160 × 580 × 600, with a listed motor rating of 0.55 kW. A stand and oil tray are identified as optional accessories. Before installation, review floor loading, access around the machine, electrical supply, chip management and safe lifting; the source data alone does not establish site readiness.
This equipment can suit training areas, maintenance departments, prototype work and small workshops that value a single conventional platform for varied jobs. For example, a shop producing small batches may turn a feature, drill a secondary hole and carry out a simple milling operation with one machine setup strategy. Actual suitability depends on materials, tolerances, duty cycle and operator skill.
Choose this combination machine for its stated combination of turning, drilling and milling functions when the work mix benefits from flexibility. Do not select it solely from the specification table: verify workpiece length, swing, bore, taper, speeds and required tooling against the job. A higher configuration is not necessarily a better fit if the needed work stays within the standard model envelope.
When evaluating the machine, distinguish confirmed facts from options. The source identifies a stand and oil tray as optional, while the standard-accessory list is separate. If a project needs special tooling, extra clearance, unusual electrical requirements or a different setup, ask for a written configuration confirmation instead of treating a generic image or an OCR label as a specification.
The specification table is useful for an initial comparison, yet paper values and real work conditions can differ. Review sample parts, material type, clamping method and cutter selection with the supplier. This page discusses only the published AT300 information; it does not claim a particular accuracy grade, automation feature, material capability, delivery term or certification beyond the source material.
| Item | Published information |
|---|---|
| Maximum swing over bed | 300 mm |
| Maximum workpiece length | 470 mm |
| Spindle bore | 26 mm |
| Lathe speed range | 160–1600 r/min, 6 steps |
| Milling speed range | 125–1600 r/min, 12 steps |
| Maximum drilling capacity | 15 mm |
| Motor | 0.55 kW |
| Overall dimensions | 1160 × 580 × 600 |
The AT300 Multi Purpose Metal Lathe Machine/Mini Combination Metal Lathe is best evaluated against a defined job list. Typical consideration areas include maintenance work, instructional environments and prototype or small-batch projects. Ask whether the required operation is primarily turning, drilling or milling, then compare the workpiece envelope and tooling needs with the published limits.
Before purchase, confirm the exact AT300-2 or AT300-5 model, included accessories, electrical configuration, installation requirements, available documentation and any local compliance needs. This review avoids unlisted claims.
For documented configuration review, the AT300 Multi Purpose Metal Lathe Machine/Mini Combination Metal Lathe should be compared with the buyer’s actual workpiece, tooling and installation plan. The AT300 Multi Purpose Metal Lathe Machine/Mini Combination Metal Lathe remains a combination platform, not a claim of universal suitability. Confirm the AT300 Multi Purpose Metal Lathe Machine/Mini Combination Metal Lathe version and final accessories in writing.
The original detail images are retained below as part of the supplied product material.


