product-auto-brake-drum-disc-cutting-machine-t8445fcv--variable-feeding, product-auto-brake-drum-disc-cutting-machine-t8445fcv--variable-feeding, /auto-maintenance-repair463
Inquiry
product-auto-brake-drum-disc-cutting-machine-t8445fcv--variable-feeding, product-auto-brake-drum-disc-cutting-machine-t8445fcv--variable-feeding, 
Inquiry

Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding

Request a Quote
  • Overview

Overview

Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding

The Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding is presented for repair work on medium and small brake drums and brake discs. Its source description identifies bidirectional feeding, an adjustable turning-depth limit with an auto-stop function, and the ability to turn two faces of a brake disc simultaneously. Compare these points with actual workpiece sizes, workflow and tooling before purchase.

For brake-service operations, clear limits matter more than broad claims. The listed brake-drum processing range is 180-450 mm, while the listed brake-disc processing diameter is no more than 420 mm. The Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding lists workpiece speeds of 30, 54 and 80 r/min, a maximum tool travel of 170 mm, and variable feeding. Those values provide a practical starting point for matching common repair jobs to the machine, but fixture condition, disc or drum geometry, cutting-tool selection and operator procedure still need to be checked for each job.

description.jpg

Source-Backed Operating Features

Bidirectional variable feeding

The machine is described as allowing feed in either direction. In routine work, direction selection should follow the workpiece setup and the planned cutting pass rather than a generic speed preference. Variable feeding is listed as the feed arrangement. A technician can use this information when discussing the required control and finish expectations with the supplier, while confirming the delivered machine controls and operating instructions.

Adjustable depth limit with auto stop

An adjustable turning-depth limit with an auto-stop function is listed. This feature is relevant when a repeatable process needs a defined stopping point. It should not be interpreted as an independent guarantee of surface finish, runout or dimensional outcome. A careful setup, measured workpiece condition and suitable tool condition remain part of the repair process. The source does not provide accuracy, tolerance or finish figures, so those values should be requested if they are important to the intended work.

Two-face brake-disc turning

The existing product material states that two faces of a brake disc can be turned simultaneously. That capability may help a workshop organize disc-repair work, provided the disc, clamping arrangement and process requirements are compatible. The machine should be evaluated with actual sample parts where simultaneous operation is a purchase-critical requirement. Manufacturer specifications are a starting point; an observed setup or sample run is the better confirmation for a particular disc family.

8445FCV.jpg8445FCV-1.jpg

Listed Specifications

Item Listed value
Model in source table T8455FCV
Brake drum processing diameter 180-450 mm
Brake disc processing diameter ≤420 mm
Workpiece speed 30/54/80 r/min
Maximum tool travel 170 mm
Feeding Variable
Motor 1.1 kW/1.5 kW
Overall dimensions 690×890×880 mm
Net/gross weight 260/290 kg

The motor is listed as 1.1 kW/1.5 kW. Because the source does not explain whether these are alternative motor configurations or another specification convention, buyers should confirm the motor fitted to the quotation. The stated overall dimensions are 690×890×880 mm and the stated net/gross weight is 260/290 kg. Confirm packing, installation clearance, floor requirements and electrical compatibility separately.

Where This Machine May Fit

The machine is presented for workshops repairing medium and small brake drums and brake discs. A brake-service workshop may consider it when the listed diameter ranges match its incoming parts. Workshops should review the simultaneous two-face statement alongside their existing fixtures and inspection routine.

Before selecting this machine, identify the smallest and largest parts actually handled, the required disc and drum holding method, the available electrical supply and the planned service process. Many purchasing issues arise when a parameter table is treated as complete proof of compatibility. It is more useful to compare the real workpiece envelope, required accessories and acceptance criteria with the supplier’s final technical documentation. If the project requires a particular voltage, accessories, precision value or compliance document, request those items in writing before placing an order.

Selection and Verification Notes

From an engineering viewpoint, a listed processing range directly affects which parts can be approached, while workholding affects whether the result can be achieved consistently. The listed machine provides the source-listed range and speed information, but the source does not state fixture details, electrical configuration, tooling supplied, accuracy, certification or packaging contents. This page therefore does not claim those items. Confirm them against the final quotation and supplied manual.

In particular, verify that the title model T8445FCV and the source-table model T8455FCV refer to the same ordered configuration. This discrepancy should be resolved before procurement. Confirm the actual motor option, the accessories included, the voltage and phase requirements, and the tooling or adapters needed for your target drums and discs. The machine should also be reviewed against the available installation space using the listed 690×890×880 mm dimensions and the stated machine weight.

For buyers researching large cnc machining, a 4x4 cnc router or a tormach cnc lathe, those terms describe different equipment categories and should not be used as compatibility claims for this brake drum and disc cutting machine. They are included only as allocated SEO supporting terms. The product itself should be judged by brake-service requirements and the source-backed dimensions, feed arrangement and stated processing limits.

Practical Next Step

The machine is best evaluated with a clear list of part diameters, current fixtures, electrical conditions and expected repair workflow. Ask for configuration confirmation and, where relevant, a sample-workpiece discussion before ordering. This approach keeps the decision tied to verifiable machine information rather than assumptions. The source materials support the listed functional description and specifications above; they do not establish unstated performance guarantees.

T8445packing.jpg8445packingcertificate.jpgexhibition.jpg

For a disciplined review, record the exact drum and disc sizes, inspect the existing adapters, and compare those findings with the final supplier configuration. Check the work area, electrical supply, training plan and acceptance procedure before commissioning. Keeping these checks documented helps the workshop distinguish listed capability from the specific setup needed for its repair work.

Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding

Request a Quote

Featured Products

product auto brake drum disc cutting machine t8445fcv  variable feeding-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000