product-auto-brake-drum-disc-cutting-machine-t8445fcv--variable-feeding780, product-auto-brake-drum-disc-cutting-machine-t8445fcv--variable-feeding780, /auto-maintenance-repair463
Inquiry
product-auto-brake-drum-disc-cutting-machine-t8445fcv--variable-feeding780, product-auto-brake-drum-disc-cutting-machine-t8445fcv--variable-feeding780, 
Inquiry

Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding

Request a Quote
  • Overview

Overview

Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding

The Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding is a workshop machine for machining brake drums and brake discs within the stated processing ranges. It is intended for service work on medium and small brake components where the required workpiece dimensions, holding method, and electrical arrangement have been checked before operation. The supplied product information identifies bidirectional feeding, a variable feeding capacity, an adjustable turning-depth limit with auto stop, and the ability to turn two brake-disc faces simultaneously. Those are practical operating features, not a substitute for confirming the condition and suitability of every individual component.

For buyers comparing brake-service equipment, the Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding offers a defined model and a clear specification set rather than a vague category description. The machine is identified as model T8455FCV in the product material. Before selecting any machine, ask a simple question: do your regular brake drums and discs fall inside the published diameter range? That check is more useful than assuming a larger-looking machine will automatically be the better match.

description.jpg

Key Operating Features

  • Brake drum and disc work: The Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding is described for repairing medium and small brake drums and discs.
  • Variable bidirectional feed: Feeding is available in either direction, with variable feeding capacity stated in the product information.
  • Turning-depth control: An adjustable turning-depth limit with an auto-stop function is listed to support controlled machining steps.
  • Two disc faces: The source material states that two faces of a brake disc can be turned simultaneously.
  • Selectable workpiece speed: Three listed rotating speeds help the operator select an appropriate setting within the machine's published capability.

The the T8445FCV brake lathe should be evaluated as part of the full brake-service process. Workpiece condition, mounting, tooling, and operator procedure all affect the final result. In real workshop use, a poor outcome is not always caused by the machine itself; locating or clamping that is unsuitable for the component can also affect the machining result. For that reason, verify the fixture and component arrangement before beginning a cut.

8445FCV.jpg8445FCV-1.jpg

Published Specifications

Item Published value
Model T8455FCV
Brake drum processing diameter 180–450 mm
Brake disc processing diameter ≤420 mm
Workpiece rotating speed 30/54/80 r/min
Maximum tool travel 170 mm
Feeding capacity Variable
Motor 1.1 kW/1.5 kW
Overall dimensions 690 × 890 × 880 mm
Net/gross weight 260/290 kg

These values are presented as supplied product data for the the T8445FCV brake lathe. They should be used for preliminary fit assessment, not as a claim about unspecified accessories, electrical configuration, tolerance, certification, shipping package, or site requirements. In particular, confirm the motor and electrical option with the supplier before ordering, because the source lists both 1.1 kW and 1.5 kW without assigning them to a particular configuration.

Where It Fits

The the T8445FCV brake lathe is relevant to automotive-service workflows that need to machine brake drums or brake discs within its published capacity. A repair workshop may value the ability to address drum and disc work with one unit, while a distributor may use the specification table to discuss fit with professional customers. It can also be considered when a workshop needs to assess brake-disc face work, provided the component, holding arrangement, and process requirements are independently verified.

The product description references brake-disc repair for medium-class, luxury, and off-road vehicles. This should be read as an application indication, not a blanket compatibility guarantee. Vehicle design and brake-component dimensions vary, so the safest selection approach is to compare the actual brake component against the stated 180–450 mm drum range and ≤420 mm disc range. If a project requires a different capacity or an unlisted configuration, request confirmation rather than relying on a general category label.

Selection Notes for Professional Buyers

When reviewing the the T8445FCV brake lathe, start with the dimensions you process most often, then examine speed selection, 170 mm maximum tool travel, and the workshop's available power. It is tempting to make a decision from a specification table alone. However, the table does not establish how a particular component will be mounted, how worn it is, or which accessories are supplied. A practical purchase inquiry should therefore include component size, intended use, voltage requirement, desired configuration, and any fixture expectations.

There is also a balance between finish expectations and throughput. The listed 30/54/80 r/min workpiece speeds and variable feeding capability provide operating information, but they do not remove the need for appropriate process settings. The correct choice depends on the workpiece and the required repair operation. The the T8445FCV brake lathe is best presented with that boundary in mind: it provides the stated machine functions, while the operator and workshop remain responsible for setup and safe use.

Why Use a Structured Specification Page

For distributors, wholesalers, and workshop buyers, a structured page makes it easier to compare the the T8445FCV brake lathe against a defined job requirement. The feature list explains the advertised operating functions, the table keeps numerical facts visible, and the application notes distinguish supported information from assumptions. This is especially useful when technical documentation is reviewed by both purchasing and service teams.

NEW DRAGON serves machinery and automotive-service-equipment audiences, including distributors, general agents, and wholesalers. The available merchant profile supports that broad equipment positioning, but it does not prove product-specific service terms, approval status, or custom options. Contact the supplier to confirm the final configuration, voltage, included accessories, delivery details, and documentation required for your market.

T8445

Request Configuration Confirmation

The the T8445FCV brake lathe provides a starting point for brake drum and brake disc repair equipment selection. Share your common component diameters, local power requirements, intended workshop process, and accessory needs when requesting a quotation. That information allows the supplier to confirm whether the published model data fits the planned use and whether any configuration details need clarification before purchase.

packing.jpg8445packingcertificate.jpgexhibition.jpg

Auto Brake Drum Disc Cutting Machine T8445FCV Variable Feeding

Request a Quote

Featured Products

product auto brake drum disc cutting machine t8445fcv  variable feeding780-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000