product-big-spindle-hole-manual-lathe-machine--tl360bcq6236bx1000mm, product-big-spindle-hole-manual-lathe-machine--tl360bcq6236bx1000mm, /bench-lathe
EN
The Big Spindle Hole Manual Lathe Machine TL360B(CQ6236B)x1000mm is a conventional manual gear lathe for turning and threading work. The published maximum workpiece length is 1000 mm and the maximum swing over bed is 356 mm. It provides a documented platform for evaluating cylindrical work against part size, workholding, tooling and the intended process. It is not presented as a CNC milling machine, a brake-disc-facing machine or a vertical lathe. Before selection, compare the actual workpiece, expected thread system, floor space, power supply and local safety requirements with the quoted configuration.
For procurement, the useful question is not simply whether a lathe has a high published speed. The Big Spindle Hole Manual Lathe Machine TL360B(CQ6236B)x1000mm should be assessed against the material, diameter, fixture and operator method used in the job. Paper specifications are a starting point, but written confirmation of the selected spindle bore, nose, taper and accessories is equally important. This page describes published information; it does not promise an unstated finished-part tolerance, production rate or material capability.
The lathe lists precision-ground and hardened bed ways, a precision roller-bearing spindle, and high-quality steel headstock gears that are ground and hardened. Published capacity includes 212 mm maximum swing over the cross slide, 506/550 mm maximum swing over the gap, and 491 mm maximum swing in the gap. The removable gap is described for larger-diameter work where setup and workholding have been reviewed. Match these figures to the complete part envelope, not only to one diameter dimension.
The standard spindle bore is listed as 38 mm, with a 51 mm larger-bore option. D1-4 or D1-5 spindle-nose alternatives and MT5 or MT6 spindle-bore taper alternatives are also listed. The Big Spindle Hole Manual Lathe Machine TL360B(CQ6236B)x1000mm should therefore be quoted with the bore, nose, taper and compatible chuck clearly identified. A standard configuration may fit a routine job, while an optional configuration may be relevant for a specific stock size; the option should not be assumed to be included.
| Published item | Listed value or alternative |
|---|---|
| Maximum workpiece length | 1000 mm |
| Swing over bed | 356 mm |
| Spindle bore | 38 mm standard; 51 mm optional |
| Spindle nose | D1-4 or D1-5 |
| Spindle-bore taper | MT5 or MT6 |
The Big Spindle Hole Manual Lathe Machine TL360B(CQ6236B)x1000mm offers stated spindle-speed options of 70–2000 rpm or 90–2000 rpm. Higher speed is not automatically the better selection: workpiece diameter, material, cutting tool, workholding and process all affect the appropriate setting. The gearbox is described as providing various feeds and a thread-cutting function. Published thread ranges are metric 0.4–7 mm in 32 kinds, imperial 5–56 TPI in 32 kinds, diametral pitch 8–120 DP in 32 kinds, and module pitch 0.2–3.5 MP in 27 kinds.
For setup planning, the machine lists 90 mm compound-rest travel, 170 mm cross-slide travel and a maximum tool section of 16 × 16 mm. Listed longitudinal feeds are 0.082–0.2713 mm/rev metric or 0.0032–0.1068 in/rev inch; listed cross feeds are 0.018–0.746 mm/rev metric or 0.0011–0.0367 in/rev inch. Confirm the required pitch, feed, tooling and setup method before order, particularly where the job depends on an exact thread or nonstandard fixture.
Published tailstock figures include a 32 mm external diameter, 100 mm maximum travel and MT3 taper of bore; centre height is listed as 178 mm. The main motor is listed at 1.5 kW and the coolant pump at 40 W. The supplied material does not state electrical-supply details. Buyers should confirm voltage, frequency, phase, connection requirements and site arrangements before shipment or installation.
The Big Spindle Hole Manual Lathe Machine TL360B(CQ6236B)x1000mm is described with a coolant system, working light, foot brake, splash guard and chip tray. For the 38 mm spindle-bore configuration, the original equipment list describes separated sheet-iron feet, 3-jaw self-centering chuck, 4-jaw independent chuck, face plate, steady rest, follow rest, dead center, thread-chasing dial and a tool box with tools. Treat this as a source list rather than a final packing commitment. Confirm the quotation line by line, including workholding, centers, supports and cutting tools needed for the intended setup.
Listed options include a 51 mm bore, live center, taper-turning attachment, drill chuck, guards, digital readout, quick-change tool post, limit stop block and separated cast-iron feet. An optional item can support a particular workflow, but it is not a product claim for every delivered machine. If the work involves irregular parts, assess whether a faceplate, four-jaw chuck, steady rest or follow rest is needed. If it involves special bore or long stock, verify the selected spindle configuration and compatible workholding.
The Big Spindle Hole Manual Lathe Machine TL360B(CQ6236B)x1000mm is suited to evaluation for general turning, thread cutting, repair, fabrication and small-batch work where manual setup flexibility matters. Suitability remains conditional on the actual part, fixture, tool, operator practice and safety controls. This is a conventional manual machine, so plan the work process accordingly rather than infer CNC functions.
For cylindrical parts, the Big Spindle Hole Manual Lathe Machine TL360B(CQ6236B)x1000mm can be considered where manual turning and threading are appropriate to the production plan. In a repair or fabrication setting, compare part length and diameter with published capacity, then confirm required thread range, chuck arrangement and tool section. That approach is more reliable than selection by one headline specification. The machine may need additional process review for thin-wall parts, irregular workpieces or work requiring specialized support.
OCR material associated with the product identifies TL360B and confirms machine-safety guidance: do not change speed while the spindle is running; wear safety glasses and safety shoes; disconnect power before servicing; keep hands clear of moving parts; do not wear gloves or loose clothing; remove the chuck key and secure the workpiece before rotating the spindle. The machine must be installed and operated in accordance with supplied documentation and applicable local rules. These reminders are not a substitute for site-specific risk assessment or operator training.
The listed packing size is 1950 × 750 × 1500 mm, with net/gross weight listed as 600/700 kg. Final packed dimensions, gross weight, lifting points, packing method and transport arrangements should be confirmed because selected options can affect delivery. Review floor support, electrical compatibility, transport access, guarding needs and available operator experience before placing an order.
The original product image sources are retained below.






