product-c45-brake-disc-drum-lathe-for-vehicles, product-c45-brake-disc-drum-lathe-for-vehicles, /auto-maintenance-repair463
Inquiry
Inquiry

C45 Brake Disc Drum Lathe for Vehicles

Request a Quote
  • Overview

Overview

C45 Brake Disc Drum Lathe for Vehicles

The C45 Brake Disc Drum Lathe for Vehicles is an off-car workshop machine for brake-disc service and related brake-drum work. The supplied product information identifies model C45 and states that it is applicable to brake discs on vehicles such as SUVs. Its listed brake-disc processing diameter is 180–450 mm, so the first practical check is whether the rotors in your normal service mix sit inside that range. This page presents the listed data in a form that helps a workshop compare the machine with its own jobs rather than treating a nameplate figure as a universal promise.

For a repair business, a brake lathe is usually evaluated around repeatable setup, the range of workpieces it can accept, and whether its operating arrangement fits the day-to-day workflow. The C45 Brake Disc Drum Lathe for Vehicles is described with a 220 r/min work-piece rotating speed and a tool travel of 130 mm. Those figures explain the operating envelope; they do not replace a compatibility check for the actual rotor, drum, fixture, tooling, power supply, and local safety requirements before purchase or use.

What the C45 Is Designed to Do

The machine is intended for turning brake-disc faces during automotive brake service. The supplied listing states that two brake-disc faces can be turned simultaneously and refers to an optimized tool post. In practice, results depend on the workpiece condition, clamping, cutting tool, operator practice, and service procedure.

For passenger-vehicle and SUV workshops, first compare the discs you routinely service with the stated 180–450 mm range. The source mentions standard and optional accessories but does not itemize them; confirm the exact package before ordering.

Listed Specifications

Item Listed value
Model C45
Brake disc processing diameter 180–450 mm
Work-piece rotating speed 220 r/min
Maximum tool travel 130 mm
Feeding rate 0.11 mm/r
Motor power 1.1 kW
Gross weight 210 kg
Packing size 850 × 620 × 900 mm

These values are reproduced from the supplied product description. The source does not state a brake-drum processing-diameter value, so none is asserted here. Similarly, the page should not be read as proof of a particular voltage, certification, surface-finish result, or included tooling package. Request the current technical configuration and documentation when any of those details affect your purchasing decision.

Features That Matter in Workshop Use

  • Two-face brake-disc turning: the existing product description states that both faces of a brake disc can be turned simultaneously.
  • Defined disc range: the 180–450 mm brake-disc processing range gives a clear starting point for matching typical rotor sizes to the machine.
  • Listed operating values: 220 r/min work-piece speed, 130 mm maximum tool travel, and 0.11 mm/r feed rate give buyers concrete figures to review with their service procedure.
  • Compact shipping reference: the supplied packing size and gross weight can support preliminary receiving and handling planning.
  • Accessory confirmation path: standard and optional accessories are referenced in the source material, but the individual items should be clarified before order confirmation.

It is tempting to compare machines using a single speed figure. In brake-service work, however, speed is only one part of the operating picture. Workpiece condition, clamping, tool condition, and the chosen procedure can affect the outcome just as strongly. A 220 r/min listed speed should be interpreted within the full service setup, not as an isolated claim of suitability for every disc or drum.

Applications and Fit Checks

The supplied listing supports automotive brake-disc machining for vehicles such as SUVs. This makes the C45 Brake Disc Drum Lathe for Vehicles relevant to automotive repair workshops that need an off-car machine for brake-disc service within the stated diameter range. It can also be considered by service centers that want a documented set of basic machine values before discussing configuration and accessories.

A second scenario is a workshop reviewing its current rotor work. Start with the dimensions of the brake discs you actually receive, then compare them with the 180–450 mm range. Next, review whether the required fixture, cutting tools, and service procedure are available. Many poor machining results are not automatically a machine problem; they can come from an unsuitable workholding arrangement or a workpiece that has not been evaluated correctly. This is why a practical demonstration or supplier technical confirmation is valuable when the job has unusual geometry or tight finish expectations.

A third scenario is planning a new brake-service station. The 850 × 620 × 900 mm packing size and 210 kg gross weight are useful logistics references, but they are not installation instructions. Verify the final machine dimensions, lifting plan, floor condition, electrical requirement, guarding, operator training, and local safety obligations before commissioning. The product images below are retained from the original listing for visual reference.

C45.jpg800c45_20230816104249.jpgC45.pngC45.png

How to Evaluate the Machine Before Ordering

Use the C45 Brake Disc Drum Lathe for Vehicles as the start of a technical conversation. Provide the disc sizes, vehicle types, daily workload, workspace, and service workflow. Confirm the current accessory list, the exact drum capability, electrical configuration, final machine dimensions, documentation, and requirements for your destination. The stated 1.1 kW motor power does not establish a particular electrical supply version.

Why a Conservative Specification Review Helps

The C45 Brake Disc Drum Lathe for Vehicles is presented with a model name, brake-disc range, operating figures, and simultaneous two-face turning. Those details create a useful review checklist, but the supplied material does not establish unlisted accuracy, cycle time, certification, voltage, warranty, or included tooling. Match the machine to the workpiece and process, not to an isolated specification figure.

Request Configuration Confirmation

When requesting a quotation for the C45 Brake Disc Drum Lathe for Vehicles, include the brake-disc sizes you need to handle, the intended application, destination electrical requirements, and the accessories you expect. Ask the supplier to confirm the current configuration, included items, packing details, and any documentation needed for your market. This keeps the selection focused on verifiable requirements and helps prevent assumptions about options that are not listed in the supplied product information.

packing.jpg9335Acertificate.jpgexhibition.jpgour factory.jpg

C45 Brake Disc Drum Lathe for Vehicles

Request a Quote

Featured Products

product c45 brake disc drum lathe for vehicles-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000