product-c45b-brake-disc-drum-lathe-for-car-repair-cutting-machine, product-c45b-brake-disc-drum-lathe-for-car-repair-cutting-machine, /auto-maintenance-repair463
Inquiry
Inquiry

C45B Brake Disc Drum Lathe for Car Repair Cutting Machine

Request a Quote
  • Overview

Overview

C45B Brake Disc Drum Lathe for Car Repair Cutting Machine

The C45B Brake Disc Drum Lathe for Car Repair Cutting Machine is a workshop machine for servicing brake discs on medium and small vehicles. Its supplied configuration is focused on brake-disc turning rather than an unsupported general-purpose machining claim. For teams comparing service equipment, the useful starting point is the documented disc range, feed arrangement, motor rating, footprint, and the way the tool post supports the machining operation.

This model is identified as C45B. The source material states that two faces of a brake disc can be turned simultaneously. It also states that the C45B has an adjustable limit switch, allowing the slider stop position to be set according to the available brake-disc diameter. These are practical operating features to review alongside your existing service procedure, technician training, and vehicle coverage.

Documented Features

Two-face brake-disc turning

The supplied product description says that two faces of the brake disc can be turned simultaneously. In a brake-service workflow, this feature gives the operator a clear process point to evaluate: the machine is designed around disc-facing work, with the tool post described as optimized for more convenient operation. Actual results depend on correct setup, tooling condition, disc condition, and the service procedure used by the workshop.

Adjustable stop-position setting

For the C45B version, the adjustable limit switch is described as enabling the slider stop position to be set for the available brake-disc diameter. This helps the operator establish a repeatable travel limit within the product’s documented range. It should not be treated as a substitute for inspection, measurement, or manufacturer service limits for a particular vehicle.

Workshop-oriented configuration

The C45B Brake Disc Drum Lathe for Car Repair Cutting Machine has a listed overall size of 900 × 700 × 1200 mm and a listed weight of 175 kg. These figures provide a practical basis for planning placement and handling. Before purchase or installation, confirm floor conditions, electrical requirements, delivery access, and the final accessory scope with the supplier.

Source-backed machine data

The specification information below is retained from the existing product material. Values are presented as supplied, without converting them into performance guarantees. Where a unit was not fully stated in the source, the original label is retained or the need for confirmation is noted.

Specifications

Item Supplied specification
Model C45B
Brake disc diameter 180–450 mm
Brake disc thickness 48 mm
Brake drum diameter Not specified in the supplied table
Rotating speed of workpiece 130 (unit not stated in the source)
Feeding capacity 0.11 mm/r
Motor power 0.75 kW
Overall dimensions 900 × 700 × 1200 mm
Weight 175 kg

Confirm compatibility with the brake discs you intend to service, including diameter, thickness, mounting method, and applicable repair limits. The source does not provide a complete brake-drum capacity, so requests involving drum work should be confirmed before ordering.

Where It Fits

Vehicle repair workshops

For a repair shop that services medium and small vehicles, the C45B Brake Disc Drum Lathe for Car Repair Cutting Machine can be considered when the job requires brake-disc turning within the stated 180–450 mm diameter range. The specification table gives the service manager a concise baseline for matching the equipment to expected disc sizes and available workshop space.

Brake-service bays

Dedicated brake-service areas can use the C45B as part of a controlled workflow that includes incoming inspection, safe machine setup, machining, cleaning, and final checks. Because disc service affects a vehicle safety system, the workshop should use qualified personnel and follow vehicle-maker limits and local safety requirements.

Equipment planning and replacement

When replacing older workshop equipment, buyers can compare the listed 0.75 kW motor power, 0.11 mm/r feeding capacity, dimensions, and 175 kg weight with their site constraints. This is a technical comparison point, not a statement that the machine will suit every process or vehicle platform.

Selection Notes

A technical review should begin with the actual disc dimensions and the type of brake work planned. Check that the disc diameter falls within the supplied 180–450 mm range and review the stated 48 mm thickness figure against the parts and method you service. Verify the meaning and unit of the listed workpiece speed with the supplier, since the source table provides the value 130 without a unit.

Also request confirmation of standard versus optional accessories, electrical configuration, tooling, installation guidance, and any required consumables. The existing source includes separate standard-accessory and optional-accessory sections but does not list every item in text. Confirming the delivered scope avoids assuming that a pictured item is included.

The C45B Brake Disc Drum Lathe for Car Repair Cutting Machine is best assessed as a documented brake-disc service machine with an adjustable slider stop position and simultaneous two-face turning described in the source. It offers a clear fact base for an informed equipment conversation while leaving vehicle-specific compatibility and operational qualification to the buyer and supplier.

Operational Considerations

In daily use, a careful technician should treat machine data as a starting point for setup rather than an automatic instruction. Inspect the brake disc, check the vehicle service information, secure the workpiece according to the approved procedure, and verify tool condition before machining. The stated dimensions and weight can help a workshop plan installation, but they do not define site requirements that were not supplied. Keep guards, maintenance practices, and training aligned with the equipment documentation provided at purchase.

Document each service. A clean and orderly brake-service area also supports inspection and handling. These practical steps are general workshop considerations and do not add claims about the supplied machine beyond its documented configuration.

Before commissioning, obtain the supplier’s current manual and accessory confirmation. Review delivery, positioning, electrical connection, tooling, maintenance intervals, and operator responsibilities with qualified personnel. This approach helps the buyer turn the listed C45B data into a considered installation plan while keeping safety and vehicle-specific decisions with the responsible workshop.

Source Images and Reference Material

Source Images and Reference MaterialSource Images and Reference MaterialSource Images and Reference MaterialSource Images and Reference MaterialSource Images and Reference MaterialSource Images and Reference MaterialSource Images and Reference MaterialSource Images and Reference Material

C45B Brake Disc Drum Lathe for Car Repair Cutting Machine

Request a Quote

Featured Products

product c45b brake disc drum lathe for car repair cutting machine-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000