product-c9335a-brake-disc-lathe-machine--for-repair-drum/disc-of-small-vehicles, product-c9335a-brake-disc-lathe-machine--for-repair-drum/disc-of-small-vehicles, /auto-maintenance-repair463
EN
The C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles is presented for workshop repair work on compatible small-vehicle brake drums and brake discs. It is a brake-service machine, not a universal machining solution, so the actual component, fixture arrangement, cutting tool, and local repair procedure should always be reviewed before setup. The published application boundary is clear: brake drums and brake discs with a stated diameter range of 180–350 mm. This makes the C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles relevant for workshops that need a documented starting point for evaluating brake components within that range.
From a practical engineering perspective, capacity is only the first check. A workpiece may fall within the listed diameter range but still need confirmation of mounting clearance, clamping method, condition, and approved machining process. The C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles should therefore be evaluated as part of a complete brake-service workflow. Read the operating manual before use and follow the workshop risk assessment and local safety requirements.
| Model | C9335A |
|---|---|
| Brake drum diameter | 180–350 mm |
| Brake disc diameter | 180–350 mm |
| Rotary speed | 75/130 r/min |
| Maximum travel | 100 mm |
| Feed speed | 0.16 mm/r |
| Motor power | 1.1/0.75 kW |
| Overall size | 690 × 565 × 635 mm |
| Packing size | 750 × 710 × 750 mm |
| Machine weight | 205/220 kg |
These figures are published specifications for the C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles. They help a buyer compare the machine with the intended workload, but they do not confirm that every part in a broad vehicle category can be repaired. Verify the measured part, fixture interface, tooling, and repair limits before work begins.
The stated 180–350 mm range applies to both brake drums and brake discs. For a service workshop, this is a useful screening measure: measure the component first, then confirm that the mounting and tool path are appropriate. The C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles is not described as a substitute for inspection of wear, damage, or manufacturer service limits.
Published rotary speeds are 75/130 r/min. A higher speed is not automatically the better choice. The workpiece condition, tool condition, setup rigidity, and required procedure matter more than a single number. In a workshop handling varied brake components, the C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles provides documented speed options that should be selected in accordance with the approved process.
The supplied information lists manual or automatic feeding, with a stated feed speed of 0.16 mm/r. This gives the operator a documented configuration feature to consider, but it is not a promise of a particular surface result or repair outcome. Feed selection should match the part condition, tool setup, and operator control requirements. If your workshop uses a defined finish or inspection process, compare it with the actual machine configuration before purchase.
The original material states that two faces of a brake disc can be turned simultaneously. This can be relevant when assessing the C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles for compatible disc-service workflows. It remains a process feature rather than a guarantee: secure mounting, correct tooling, component inspection, and the workshop procedure determine whether a given job is suitable.
The stated maximum travel is 100 mm. The overall size is 690 × 565 × 635 mm, while the packing size is 750 × 710 × 750 mm. These values help with preliminary layout and handling discussions. Allow room for stable placement, safe operator movement, lifting, service access, and electrical connection. A compact footprint alone does not establish that the installation site is ready.
For an independent brake-service bay, the C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles can be reviewed when the common workload involves measured brake drums or discs inside the published 180–350 mm range. In this scenario, the buyer should confirm the workholding method and the repair criteria used by the shop before relying on a capacity figure.
For an automotive aftermarket workshop that carries out component inspection and machining as separate steps, the C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles can form part of a controlled repair process. The practical value comes from matching the documented diameter range, speeds, feed arrangement, and available travel to the real component and procedure. It does not remove the need for trained operation or a final inspection.
For a distributor or buyer planning equipment for a small-vehicle service area, the published dimensions and 205/220 kg machine-weight listing support early logistics planning. Confirm final freight terms, packaging, unloading equipment, included accessories, electrical requirements, and site preparation in the quotation. The source does not specify voltage options, plugs, certifications, warranty terms, or the complete accessory list.
Many setup problems are not caused by the machine alone but by an unverified clamping arrangement or a mismatch between the expected electrical supply and the delivered configuration. For that reason, the C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles is best selected through a documented check of the intended parts and site conditions. Supplier specifications are a useful reference point; an order-specific confirmation of compatibility and configuration provides the stronger purchasing basis.
The available material notes a tool-post upgrade from November 2024, but it does not provide a detailed bill of materials or a compatibility statement. Buyers requiring a specific tool post, fixture, or cutting-tool setup should request written confirmation. Likewise, “standard accessories” are mentioned without an itemized list, so do not assume that every pictured or customary item is included with the C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles.
The original information supports a neutral, fact-based selection. It documents the model, capacity, speeds, travel, feed rate, motor-power listing, dimensions, packing size, machine weight, feed options, and dual-face turning statement. It does not substantiate claims about precision accuracy, certification, price, lead time, warranty, or guaranteed machining results. Keep these questions open until they are confirmed for the actual order.
Terms such as smart cnc and quick turn machining may appear in broad equipment searches, but they are not claimed features of this manually or automatically fed brake lathe. The C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles should be compared on its published brake-service facts rather than on unrelated search terminology. This page covers product-selection information only and does not replace the operating manual, formal training, brake-component specifications, or local safety rules.
The C9335A Brake Disc Lathe Machine for Repair Drum/disc of Small Vehicles offers a documented 180–350 mm brake drum and disc range, 75/130 r/min rotary speeds, 100 mm maximum travel, 0.16 mm/r feed speed, manual or automatic feeding, and a stated dual-face disc-turning feature. Use these facts to screen a compatible small-vehicle brake-service application. Before ordering or operating, verify the component, workholding, accessory scope, electrical configuration, installation conditions, and approved workshop procedure.