C9340-G-W Double-Side Brake Disc Grinding Machine
The C9340-G-W is a brake disc grinding machine described in the source materials as grinding both disc sides simultaneously with water cooling. Its published configuration includes a variable-speed spindle, a 3.05 kW motor, and listed limits for compatible disc dimensions. It is intended for a workshop discussion centered on actual disc size, workholding, electrical supply, and the requested machine configuration.
C9340-G-W Grind both side simultaneously Water Cooling Grinding and Brake Disc Machine Disc Brake Grinding Machine is the default product phrase supplied for this page. No separate SEO keyword was provided, so the original product title remains unchanged. The important selection issue is whether the published dimensions and installation requirements match the intended brake-disc work.
Published Working Range
The C9340-G-W is listed for disc diameters up to 400 mm. The published maximum disc thickness is 40 mm, and maximum disc width is 100 mm. These figures provide a useful pre-purchase screen, but they do not replace confirmation of the specific workpiece, fixture arrangement, and operating procedure. A disc outside the stated range should be reviewed with the supplier instead of being assumed compatible.
| Item |
Published specification |
| Model |
C9340-G-W |
| Grinding arrangement |
Both sides simultaneously |
| Disc diameter range |
Up to 400 mm |
| Maximum disc thickness |
40 mm |
| Maximum disc width |
100 mm |
| Spindle speed |
Variable |
| Motor power |
3.05 kW |
| Voltage |
220 V / 380 V |
Variable spindle speed is an adjustment feature, not an automatic performance guarantee. Speed should be selected for the disc condition, grinding wheel, workholding, and documented operating process. The published information does not state a finished-surface value, output tolerance, cycle time, or throughput figure, so those results should be confirmed rather than inferred from the motor rating.
Source-Supported Features
-
Simultaneous double-side grinding: the machine is described as grinding both disc faces in the same operating cycle.
-
Water-cooling configuration: water cooling appears in the original product title; confirm coolant handling and workshop requirements for the supplied version.
-
Variable spindle speed: the listed spindle provides an adjustment point for supported work conditions.
-
Defined workpiece envelope: published diameter, thickness, and width limits help buyers screen intended discs before purchase.
-
Diamond grinding wheel: the original materials name a diamond grinding wheel as a spare part and state 800–1000 brake discs; actual wheel life depends on disc material, wheel condition, setup, and operating practice.
C9340-G-W Grind both side simultaneously Water Cooling Grinding and Brake Disc Machine Disc Brake Grinding Machine should be considered as a source-described configuration, not a promise that every brake disc can be processed without verification. Correct workholding is important. A disc that is not properly supported or clamped can influence the process regardless of the machine’s published size range. Confirm required fixtures and representative disc condition before ordering.
Potential Application Contexts
The supplied materials support brake-disc grinding work. The machine may be relevant to automotive service workshops, brake-service operations, and distributors supporting repair facilities that handle discs within the listed envelope. It may also be considered where a buyer wants a published double-side grinding arrangement with water cooling. These are general use contexts, not a guarantee for a particular vehicle, rotor design, or local repair regulation.
For work mainly inside the stated range, the C9340-G-W can be a basis for a technical configuration discussion. For unusually thick, wide, or large discs, or where documented output tolerance is required, request technical confirmation before placing an order. The source materials do not provide a universal compatibility list, a vehicle coverage list, or a specific machining-accuracy grade.

Power, Packaging, and Delivery Planning
The C9340-G-W is listed with 220 V / 380 V voltage. Confirm the required supply, phase arrangement, and local electrical requirements with a qualified installer before delivery. The two listed voltage values do not prove that every regional connection is supplied as standard. Electrical confirmation is especially important for export shipments or a workshop with an existing power arrangement.
Published package sizes are 795 × 610 × 630 mm for the machine, 580 × 580 × 1130 mm for the dust collector package, and 1220 × 920 × 1115 mm for the wet type. Published net/gross weights are 178/215 kg for the machine, 24/43 kg for the dust collector, and 208/270 kg for the wet type. Use these figures for initial freight and handling planning, then verify the exact configuration and packing list before transport is booked.
The published lead time is 3–20 days. This is an indication rather than a fixed delivery commitment; confirm it for the order quantity, final configuration, and destination. Site access, unloading equipment, working clearance, drainage, and coolant management should also be reviewed before arrival.
Accessories and Purchase Checks
The original materials list a diamond grinding wheel as a spare part and mention CE certificate and Original Certificate. Confirm certificate scope, document availability, and destination-market requirements for the specific order. Do not infer a standard number or regional approval from the general certificate wording. Clear, source-consistent documentation supports a more responsible technical comparison.
Before ordering, prepare dimensions for representative brake discs, confirm local voltage, identify whether the water-cooling and wet-type arrangement is needed, and ask which accessories are included. It is sensible to confirm the grinding-wheel specification, fixture arrangement, commissioning needs, and available operating documentation. These checks can prevent a mismatch between a published envelope and the workshop’s actual workpieces.
![H665e6c26ea1b486189a580da49adb0a0E[1].jpg](https://shopcdnalpha.grainajz.com/category/528263/5610/049cc6dad1f8aeb04e17d86d66a76164/H665e6c26ea1b486189a580da49adb0a0E%5B1%5D.jpg)



Selection Summary
A brake disc machine should be selected using supported dimensions and operating needs rather than a broad feature checklist. C9340-G-W Grind both side simultaneously Water Cooling Grinding and Brake Disc Machine Disc Brake Grinding Machine combines the source-listed double-side grinding description, variable spindle speed, 3.05 kW motor, and defined disc limits. Where the workshop’s discs and site conditions match those details, request confirmation of the final configuration.
When comparing a snap on brake lathe with a double-side grinding solution, compare the actual process, compatible disc envelope, wheel and fixture system, electrical needs, delivery scope, documentation, and service plan. A category name alone is not enough. Request technical confirmation for representative discs and the intended configuration before ordering.