product-ck360h-metal-lathe--manual-and-cnc-combination-lathe-machine-new-type, product-ck360h-metal-lathe--manual-and-cnc-combination-lathe-machine-new-type, /flat-bed-cnc-lathe
Inquiry
product-ck360h-metal-lathe--manual-and-cnc-combination-lathe-machine-new-type, product-ck360h-metal-lathe--manual-and-cnc-combination-lathe-machine-new-type, 
Inquiry

CK360H Metal Lathe Manual and CNC Combination Lathe Machine New Type

The CK360H is a manual/CNC combination lathe with a touchscreen interface, three operating modes, Φ360mm swing, 750mm centers, Φ40mm spindle bore, 3kW motor, 4-station turret, and four-system threading with 0.01mm repositioning accuracy.

Request a Quote
  • Overview

Overview

CK360H Metal Lathe Manual and CNC Combination Lathe Machine New Type

The CK360H Metal Lathe Manual and CNC Combination Lathe Machine New Type is a full-touchscreen turning machine that supports Manual Mode, Auto Mode, and MDI Mode on one platform. Operators switch between hand control and automated turning cycles without changing equipment or losing setup state — removing the compromise that forces workshops to maintain separate manual and CNC machines for different job categories.

Who Should Consider This Machine

The adaptation time when transitioning from manual to CNC turning — the hours spent learning programming, toolpath visualization, and mode switching — consistently runs longer than estimated. The CK360H Metal Lathe Manual and CNC Combination Lathe Machine New Type addresses this with a visual touchscreen interface that presents G-code execution in a way that is easier to follow than a traditional alphanumeric console. Manual mode stays fully accessible as a learning fallback. For small-to-medium workshops and training operations, this dual capability removes the forced choice between a manual lathe now and a CNC later.

Key Features

  • Three Operating Modes Without Reconfiguration: Manual Mode for direct handwheel control, Auto Mode for unattended production cycles, and MDI Mode for single-block G-code execution. All three modes are available from the same control panel, covering the full operational range of a typical mixed-use turning shop.
  • Visual Touchscreen Control: The interface displays live toolpath feedback and parameter status, reducing setup errors and shortening operator onboarding time versus conventional G-code consoles.
  • Complete Four-System Thread Coverage: Metric (0.25–12 mm), inch (12–60 TPI), module (0.25–2.5 MOD), and diametral pitch (2–32 DP) in one setup, without secondary equipment or manual gearbox reconfiguration.
  • Precision Ball Screw Axes: X-axis (20-4) and Z-axis (32-5) ball screws deliver 0.02 mm positioning and 0.01 mm repositioning accuracy, maintaining dimensional consistency across extended production batches.
  • 4-Station Turret: Tool shanks up to 80×80×70 mm per station. Unlike a gang tool CNC lathe where positions are fixed for small-diameter bar work, this turret supports broader part diameters and mixed operation sequences in one setup.

Technical Specifications

Specification CK360H Unit
Swing over bed Φ360 mm
Swing over carriage Φ164 mm
Max. workpiece length 750 (between centers) mm
Bed width 206 mm
Chuck size Φ160 mm
Spindle gear stages 2 stages —
Spindle speed 1000–2400 r/min —
Spindle bore Φ40 mm
Spindle taper MT5 —
Spindle nose A2-5 —
X-axis travel 190 mm
Tool stations 4 —
Tool shank size 80×80×70 mm
Tailstock quill travel 120 mm
Tailstock quill diameter Φ45 mm
Tailstock taper MT4 —
X/Z rapid feed 3000–6000 mm/min
Metric thread 0.25–12 mm
Inch thread 12–60 TPI
Module thread 0.25–2.5 MOD
Diametral pitch 2–32 DP
Ball screw (X/Z) 20-4 / 32-5 —
Main motor 3 kW
Servo motors (X/Z) 750W–1800W —
Torque (X/Z) 2.4–5.73 N·m
Positioning accuracy 0.02 mm
Repositioning accuracy 0.01 mm

JIG-1-800.jpg

Turning Operations

External and internal profile turning, facing, step turning, grooving, taper turning, thread cutting across all four standard systems, and drilling via the MT4 tailstock — all in a single setup. A typical shaft or flange part requiring profiling, facing, and threading completes in one chuck load, reducing repositioning errors between operations. The 2-stage spindle gearbox covers 1000–2400 r/min across steel and aluminum cutting speeds without manual gear changes. X and Z ball screws maintain 0.02 mm positioning accuracy throughout, and the Φ40 mm through-hole spindle bore supports bar-fed machining for shaft and rod production.

Application Scenarios

Mixed-Volume Production Shops

A workshop running custom flanges in the morning and 200-piece shaft batches in the afternoon benefits directly from having Auto mode for unattended cycles and manual mode for same-day setup and correction work. For buyers comparing a 3 axis cnc machine for sale in the turning category, the CK360H Metal Lathe Manual and CNC Combination Lathe Machine New Type provides a verified specification base — Φ360 mm swing, 750 mm centers, 0.02 mm accuracy — for shaft, flange, and housing production at small-to-medium volumes.

CNC Training Operations

Technical schools and in-house training programs use combination lathes because trainees learn manual turning first, then progress to MDI and Auto mode without switching machines. The touchscreen interface reduces initial errors during supervised training. The desktop cnc principle — that a machine should be approachable without sacrificing production capability — applies here at full industrial scale. This is not a downscaled educational tool; it is a production machine with accessible controls.

Automotive and Industrial Parts

Valve bodies, stub axles, and bearing housings require Φ40 mm through-hole bore, Φ160 mm chuck, and adequate swing. The gang tool CNC lathe configuration suits exclusively small-diameter bar work. For mixed part types across a full production day, the turret design of the CK360H Metal Lathe Manual and CNC Combination Lathe Machine New Type delivers better operational flexibility. Verify coolant flow rates and chip management with the manufacturer for specific material conditions.

Key Differentiators

  • One Platform for Both Modes: Manual and CNC turning on one machine reduces floor space and eliminates the capital cost of a second dedicated turning machine.
  • Touchscreen Reduces Training Time: The visual control interface shortens operator onboarding time directly, reducing both training duration and cost per new operator hired.
  • Four Thread Standards: Metric, inch, module, and diametral pitch all on the same machine without regearing.
  • Ball Screw Repeatability: 0.01 mm repositioning accuracy maintains dimensional consistency across extended production runs for tight-tolerance parts including shafts, flanges, and bearing-fit components.
  • Verifiable Specifications: Key transmission components from documented suppliers. Confirm component supplier details and request full factory documentation and test records before placing a large-volume order.

The CK360H Metal Lathe Manual and CNC Combination Lathe Machine New Type suits workshops that need CNC capability and manual flexibility together. For fully automated high-volume turning only, a dedicated CNC turning center may offer higher cycle efficiency. For mixed-use shops, training operations, and manufacturers growing into CNC, this combination machine provides consistent operational value.

Packaging & Shipping

800_20201103_100135.jpg

Our Certificate

certificate.jpg

OUR EXHIBITION NEW

Backup_of_.jpg

Company Information

our factory.jpg

CK360H Metal Lathe Manual and CNC Combination Lathe Machine New Type

The CK360H is a manual/CNC combination lathe with a touchscreen interface, three operating modes, Φ360mm swing, 750mm centers, Φ40mm spindle bore, 3kW motor, 4-station turret, and four-system threading with 0.01mm repositioning accuracy.

Request a Quote

Featured Products

product ck360h metal lathe  manual and cnc combination lathe machine new type-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000