product-cs6250c-high-quality-heavy-duty-precision-metal-lathe-machine, product-cs6250c-high-quality-heavy-duty-precision-metal-lathe-machine, /engine-lathe
Inquiry
product-cs6250c-high-quality-heavy-duty-precision-metal-lathe-machine, product-cs6250c-high-quality-heavy-duty-precision-metal-lathe-machine, 
Inquiry

CS6250C High Quality Heavy Duty Precision Metal Lathe Machine

Request a Quote
  • Overview

Overview

CS6250C High Quality Heavy Duty Precision Metal Lathe Machine

The CS6250C High Quality Heavy Duty Precision Metal Lathe Machine is a conventional metalworking lathe for shops that need a documented, general-purpose platform for rotary work. Its supplied product information describes internal and external turning, taper turning, end facing, drilling, boring, groove broaching, and machining flat or irregularly shaped stock. This page keeps the listed facts central so a buyer can compare configuration and capacity with the workpieces planned for the shop.

For technical review, the machine is identified as model CS6250C. The published table lists a maximum swing over bed of 500 mm, maximum swing in the gap of 710 mm, and maximum swing over the slide of 300 mm. These figures are useful starting points for checking workpiece envelope, tooling clearance, and fixture planning; final suitability should be confirmed against the actual job and supplied configuration.

Published working envelope and spindle details

Specification Published value
Model CS6250C
Maximum swing over bed 500 mm
Maximum swing in gap 710 mm
Maximum swing over slide 300 mm
Maximum workpiece length 1000 / 1500 / 2000 / 3000 mm
Spindle bore 105 mm
Spindle type ISO 702/II No. 8 cam-lock type
Spindle speed 12 steps, 36–1600 rpm
Spindle motor 7.5 kW

This conventional lathe combines these published capacity figures with a 105 mm spindle bore and a 12-step speed range of 36–1600 rpm. Rather than treating a number alone as a guarantee of a result, an engineering review should consider material, tool geometry, workholding, finish target, and safe setup. That measured approach helps procurement teams align a machine specification with the actual process they intend to run.

Features for conventional turning work

  • Turning functions: the source material lists internal and external turning, taper turning, and end facing.
  • Threading capability: listed threading systems include inch, metric, module, and diametric pitch.
  • Machining flexibility: drilling, boring, and groove broaching are listed among supported operations.
  • Bar-stock handling: the published through-hole spindle bore is intended to accommodate larger-diameter bar stock within the stated bore.
  • Power options: the original description notes 220 V, 380 V, or 420 V and 50 Hz or 60 Hz options; confirm the available version before ordering.

With these functions, the machine can be evaluated for repair work, component turning, and mixed-job workshop production where a conventional manual lathe is appropriate. The listed X travel is 145 mm and Z travel is 320 mm. Published feed information includes 65 X-feed kinds from 0.063–2.52 mm/r and 65 Z-feed kinds from 0.027–1.07 mm/r, offering documented choices for process setup.

Threading, tailstock, and tooling information

The machine lists 22 metric thread kinds from 1–14 mm, 25 inch thread kinds from 28–2 t.p.i., 18 module thread kinds from 0.5–7 mm, and 24 diametric-pitch thread kinds from 56–4 t.p.i. The tailstock quill diameter is listed as 90 mm, with 150 mm maximum quill travel and MT5 taper. A published tool outside-diameter size of 25 × 25 mm provides another reference point for planning conventional toolpost tooling.

These details allow a buyer to begin a disciplined comparison. For example, a shop considering the CS6250C High Quality Heavy Duty Precision Metal Lathe Machine can map typical shaft diameters to the swing and bore values, then compare required thread ranges with the listed selections. Before a purchasing decision, confirm all options, electrical requirements, safety equipment, and delivered accessories with the supplier because availability may depend on the selected length and configuration.

Where the machine may fit

The CS6250C High Quality Heavy Duty Precision Metal Lathe Machine is described for operations commonly needed when processing rotary parts: turning, facing, taper work, drilling, boring, and grooving. This makes it relevant for a maintenance workshop that needs to remake or finish cylindrical components, a general fabrication shop handling varied turned parts, and a production environment that requires conventional threading across several listed systems. These are application examples, not claims about a particular buyer’s output rate or material capability.

For a repair team, the listed functions can support facing, outside turning, boring, or threading as the job requires. Fabrication buyers can check the published dimensions against drawings before selecting tooling. Training or process-development teams should use appropriate supervision and safety procedures.

Accessories and configuration review

The original product description lists standard accessories including a 3-jaw chuck and adapter, 4-jaw chuck and adapter, faceplate, drive plate, 4-station conventional toolpost, steady rest (noted as unavailable for 1000 mm), follow rest, foot brake, mechanical feed stop, LED work lamp, and tools. Optional accessories listed include a live center, stainless-steel three-bar protection, curtain three-bar protection, taper-turning attachment, thread-chasing dial, Italy-type quick-change toolpost, European-type quick-change toolpost, and 2-axis or 3-axis digital readout options.

Because accessories affect setup and workflow, the CS6250C High Quality Heavy Duty Precision Metal Lathe Machine should be specified with a clear quotation checklist. Ask which chuck, rest, guard, toolpost, readout, electrical option, and bed length are included. Review the listed machine dimensions—lengths of 2632/3132 mm or 3632/4632 mm, width 975 mm, and heights of 1270/1450 mm—alongside the planned installation route, foundation, lifting plan, and service access.

Practical selection notes

A precision metal lathe purchase benefits from a fact-first review. The CS6250C High Quality Heavy Duty Precision Metal Lathe Machine has published net/gross weight combinations of 2100/2300 kg, 2200/2400 kg, 2500/2900 kg, and 2600/3000 kg, corresponding to different versions in the source information. Weight, dimensions, and configuration should therefore be confirmed together rather than treated as one fixed shipment specification.

The CS6250C High Quality Heavy Duty Precision Metal Lathe Machine presents a documented combination of swing capacity, 105 mm spindle bore, stepped spindle speed, threading choices, and conventional accessories. Its differentiating value is not an unverified promise: it is the breadth of source-listed machining functions and configuration references a buyer can inspect. Share your workpiece drawing, material, length, diameter, thread requirement, power supply, and requested accessories to validate whether the quoted configuration matches the intended application.

Product images

6250C.jpgCS6250CX1000-800.jpg6250C-800.jpg

PACKING-800CS.jpg

certificate.jpg

exhibition.jpg

CS6250C High Quality Heavy Duty Precision Metal Lathe Machine

Request a Quote

Featured Products

product cs6250c high quality heavy duty precision metal lathe machine-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000