The Cylinder Boring Machine T8016A is a compact machine for reboring engine cylinders in automotive, motorcycle, and tractor service work. It is intended for workshops that need a straightforward way to restore or enlarge cylinder bores within the machine’s stated working range. The supplied product information identifies the Cylinder Boring Machine T8016A as model T8016A, with a boring diameter range of Φ80–Φ165 mm and a maximum boring depth of 400 mm. These figures give a practical starting point for checking whether a particular engine block and planned operation fit the machine.
For repair operations, a boring machine should be evaluated against the actual block, fixture, cutter, and target finish rather than from a model number alone. The Cylinder Boring Machine T8016A provides two listed spindle speeds, 200 and 300 r/min, plus a spindle feed of 0.12 mm/r. Those stated settings help an operator plan a repeatable boring sequence, while final cutting conditions should still be selected for the workpiece, tooling, and required repair process. The machine description also highlights reliable performance, flexible operation, rigidity, and cutting capacity; those are useful operating aims, not substitutes for setup verification.
| Model | T8016A |
|---|---|
| Boring diameter | Φ80–Φ165 mm |
| Maximum boring depth | 400 mm |
| Spindle speed | 200, 300 r/min |
| Spindle feed | 0.12 mm/r |
| Spindle rapid reset | 780 mm/min |
| Voltage | 220 V / 380 V |
| Motor output | 0.25 / 0.37 kW |
| Motor speed | 1440 r/min |
| Overall dimensions | 320 × 330 × 850 mm |
| Package size | 500 × 480 × 1250 mm |
| N.W. / G.W. | 87 / 130 kg |
From a mechanical-engineering viewpoint, the value of the Cylinder Boring Machine T8016A lies in having its key limits presented together: bore range, depth, speed, feed, electrical options, and dimensions. That information makes it easier to compare the intended work with the machine’s published capability. It does not, however, establish the suitability of any unlisted fixture, cutter, or engine design. Confirming those items before purchase is important, especially when existing tooling must be retained.
The supplied application statement places the Cylinder Boring Machine T8016A in engine-cylinder reboring for automobiles, motorcycles, and tractors. In an automotive repair shop, it can be considered when a cylinder block requires a controlled reboring operation within the stated diameter and depth limits. In a motorcycle service setting, the same check begins with the actual cylinder dimensions, the intended oversize process, and the available workholding. For tractor-engine maintenance, buyers can use the published range and depth as an initial filter before reviewing the specific block and repair procedure.
For example, a workshop rebuilding automotive or motorcycle engine components may first confirm that the cylinder diameter is within Φ80–Φ165 mm, then review the required bore depth against the 400 mm maximum. That sequence is more useful than selecting only by spindle speed. Paper specifications are essential, but they do not replace a check of block geometry, cutter compatibility, alignment requirements, and the finishing operation that follows boring.
The Cylinder Boring Machine T8016A is supplied with 220 V / 380 V listed voltage options. Buyers should confirm local supply voltage and the chosen configuration before installation. They should also allow for the packed dimensions of 500 × 480 × 1250 mm and the stated gross weight of 130 kg when arranging handling and placement. These are planning considerations drawn directly from the supplied information; no installation accessories, certification, or delivery arrangement is claimed here.
Accuracy and productivity depend on the complete process. A stable setup, correctly selected boring tool, suitable workholding, and inspection practice all influence the result. It is tempting to judge a boring machine only by its numbers, but the actual operating result also depends on the engine component and the workshop procedure. Where the job demands a particular bore tolerance, surface finish, or accessory interface, confirm those requirements with the supplier before ordering and scheduled use. This measured approach keeps the Cylinder Boring Machine T8016A aligned with the work it is being asked to perform.
The Cylinder Boring Machine T8016A combines a clearly stated reboring application with a defined Φ80–Φ165 mm diameter range, 400 mm maximum depth, two spindle speeds, and compact machine dimensions. It is a practical option to review for engine-repair environments handling automobile, motorcycle, or tractor cylinders. Its published information is strongest when used as a technical selection checklist: verify cylinder size, depth, electrical supply, workholding, tooling, and the desired repair outcome. Contact the supplier to confirm configuration details and compatibility for your planned operation.
Before placing an order, buyers can prepare a job-specific review. Confirm the cylinder block dimensions, required finished bore, boring depth, available cutter system, and workholding method. Check whether the workshop can provide the selected 220 V or 380 V supply and whether its handling plan accommodates the package size and gross weight. Review alignment procedures, measuring tools, operator training, and the intended inspection method before production work begins. If a repair process requires accessories, fixtures, tolerances, or finishes not stated on this page, obtain written confirmation before purchase. This practical review helps a workshop use the published information responsibly and makes it easier to compare the T8016A with the actual repair task. The Cylinder Boring Machine T8016A should be selected only after those compatibility checks are complete. In day-to-day use, maintain clean workholding, follow the toolmaker’s procedures, and inspect each bore against the repair specification carefully.





