product-d290x700v-f-new-type-metal--bench-lathe-with-double-rods, product-d290x700v-f-new-type-metal--bench-lathe-with-double-rods, /bench-lathe
EN
The D290X700V-F is a CE-certified manual bench lathe with a double-rod carriage system, 290mm swing, 700mm centers, 38mm MT5 spindle bore, 1.1kW variable DC motor at 50–1800 RPM, and dual metric/inch threading.
When buyers compare bench lathes, most begin with swing capacity and center distance — correct starting points. The structural detail that determines whether those specifications translate into consistent performance is carriage support. The D290X700V-F New Type Metal Bench Lathe With Double Rods addresses this with a twin-rod bed design: the dual guide rod configuration provides more contact surface between carriage and bed than a single-guideway arrangement, which reduces lateral deflection under cutting loads and ensures consistent tracking across the full 700mm travel range. For buyers comparing a grizzly lathe mill or evaluating whether a cnc part program workflow is necessary, this design-level difference matters.
In actual turning, steel and cast iron workpieces tend to expose vibration behavior more clearly than specification tables suggest. The twin rod structure keeps the carriage controlled through moderate cutting conditions — operators report that continuous turning passes across the full center distance show noticeably more stable tracking compared to lighter single-guideway machines at similar spindle speeds. Carriage drift, which accumulates over time on less rigid designs, becomes a non-issue at the structural level rather than something compensated for through operator technique or repeated adjustment. The D290X700V-F New Type Metal Bench Lathe With Double Rods is designed so that consistent tracking is built into the machine structure, not dependent on a cnc part program or external correction.
The following specifications apply to the D290X700V-F New Type Metal Bench Lathe With Double Rods.
| Machine Model | D290X700VF |
| Swing Over Bed | 290 mm |
| Distance Between Centers | 700 mm |
| Spindle Bore | 38 mm |
| Spindle Taper | MT5 |
| Spindle Speed | 50–1800 RPM (variable) |
| Metric Thread Range | 0.25–3.5 mm |
| Inch Thread Range | 8–56 TPI |
| Top Slide Travel | 63 mm |
| Cross Slide Travel | 140 mm |
| Tailstock Sleeve Stroke | 94 mm |
| Tailstock Sleeve Taper | MT3 |
| Motor Power | 1.1 kW |
| Overall Dimensions (L×W×H) | 1400 × 700 × 665 mm |
| Net Weight / Gross Weight | 208 kg / 245 kg |
The D290X700V-F New Type Metal Bench Lathe With Double Rods handles metal, wood, jade, and other machinable materials. The variable speed range accommodates soft materials at higher RPM and hard metals including steel and cast iron at controlled lower speeds. For automotive reconditioning shops handling shaft turning, thread repair, and brake component machining, the 290mm swing and 700mm center distance cover a broad range of standard automotive component dimensions. The continuously variable motor allows speed adjustments between jobs without mechanical intervention — a practical efficiency advantage across a full production day. For shops that also use a grizzly lathe mill or rely on a cnc part program for other operations, this manual lathe provides a complementary capability for setup, repair, and prototype work.
Vocational training and technical school labs are natural environments for the D290X700V-F New Type Metal Bench Lathe With Double Rods. Unlike a CNC lathe executing a cnc part program, manual turning requires the operator to control feed rate, depth of cut, and thread pitch through direct engagement with the machine. That direct relationship between operator input and machined result builds foundational turning knowledge that CNC simulation training does not replicate. Prototype workshops, maintenance facilities, and multi-material shops processing aluminum, steel, brass, wood, or jade in the same session will find the dual thread-cutting capability — metric 0.25–3.5mm and inch 8–56 TPI — and variable speed range sufficient for general-purpose turning requirements. Even operators accustomed to a cnc part program will find the D290X700V-F New Type Metal Bench Lathe With Double Rods useful for quick manual operations.
Compared to grizzly lathe mill alternatives and other machines in the small-to-mid bench lathe category, two features define the D290X700V-F New Type Metal Bench Lathe With Double Rods: the double-rod carriage system and the maintenance-free DC motor. The carriage design distinguishes the D290X700V-F New Type Metal Bench Lathe With Double Rods from comparably priced single-guideway designs — the structural difference shows in surface finish and dimensional consistency during extended turning operations. CE certification and available factory inspection documentation simplify import qualification for European Union buyers and distributors in regulated markets worldwide.
For buyers moving from a grizzly lathe mill to a double-rod design, the difference is most visible in long turning passes where carriage stability directly affects dimensional consistency. For workshops that also run a cnc part program on separate CNC equipment, the D290X700V-F New Type Metal Bench Lathe With Double Rods fills the gap for manual setup, one-off parts, and repair work without occupying CNC production time.
Standard accessories included: Dead Centers (2 pcs), Change Gears (1 set), Toolbox and Tools (1 set).
Optional accessories available: Four Jaw Chuck, Follow Rest, Steady Rest, Face Plate, Rolling Center, Stand, Turning Tools, Splash Guard, Chip Tray.




Q: What distinguishes the D290X700V-F New Type Metal Bench Lathe With Double Rods from a grizzly lathe mill?
A: The D290X700V-F New Type Metal Bench Lathe With Double Rods uses a double-rod carriage system that provides greater lateral stiffness and more contact surface than single-guideway designs. Compared with a grizzly lathe mill, this structure reduces carriage drift and supports more consistent tracking over the full 700mm travel range.
Q: Can the D290X700V-F New Type Metal Bench Lathe With Double Rods run a cnc part program?
A: No. The D290X700V-F New Type Metal Bench Lathe With Double Rods is a manual bench lathe. It does not execute a cnc part program. However, it is well suited for manual turning, thread cutting, prototype work, and repair operations that complement CNC production.
Q: Is the D290X700V-F New Type Metal Bench Lathe With Double Rods suitable for steel and cast iron turning?
A: Yes. The variable speed DC motor provides 50–1800 RPM with adequate torque at lower speeds, which is preferable for steel and cast iron surface finish and tool life. The double-rod carriage system helps maintain stability during moderate cutting conditions.

For inquiries about the D290X700V-F New Type Metal Bench Lathe With Double Rods, including specifications, accessories, CE documentation, and shipping details, please contact us. Buyers comparing a grizzly lathe mill or planning a cnc part program workflow are welcome to request a detailed quotation and configuration recommendation.
The D290X700V-F is a CE-certified manual bench lathe with a double-rod carriage system, 290mm swing, 700mm centers, 38mm MT5 spindle bore, 1.1kW variable DC motor at 50–1800 RPM, and dual metric/inch threading.