product-g4017--65-metal-band-saw-metal-cutting-band-saw-machine, product-g4017--65-metal-band-saw-metal-cutting-band-saw-machine, /metal-cutting-saw
EN
The G4017 6.5 inch Metal Band Saw Metal Cutting Band Saw Machine is a specification-led workshop machine for cutting metal stock with a continuous band blade. Built around model G4017, it gives purchasing teams a clear set of documented operating figures to compare before selecting a saw for regular fabrication work. The machine is described as a 6.5 inch metal band saw and uses a 900 W motor in either 230 V or 380 V configurations. Rather than relying on broad performance promises, this page focuses on the stated blade, speed, swivel, capacity, packing, and loading information so that a buyer can assess fit against the workpiece and electrical requirements of a planned installation.
For shops that need angled cuts as well as straight cuts, the G4017 6.5 inch Metal Band Saw Metal Cutting Band Saw Machine has a bow swivel range of 0° to 60°. Its listed blade size is 2105 × 20 × 0.9 mm. Documented blade speeds are 80 m/min for 230 V, 97 m/min for 110 V, and 80/40 m/min for 380 V. These figures should be compared with the material, section shape, blade selection, and local operating procedure before purchase. Confirm the voltage option and intended cutting process with the supplier when preparing an order.
| Model | G4017 |
|---|---|
| Machine description | 6.5 inch metal band saw |
| Motor | 900 W (230 V) / 900 W (380 V) |
| Blade size | 2105 × 20 × 0.9 mm |
| Blade speed | 80 m/min (230 V); 97 m/min (110 V); 80/40 m/min (380 V) |
| Bow swivel range | 0°–60° |
| 90° cutting capacity | 170 mm / 140 × 140 mm / 210 × 140 mm |
| 45° cutting capacity | 120 mm / 110 × 110 mm / 130 × 110 mm |
| 60° cutting capacity | 70 mm / 60 × 60 mm / 70 × 60 mm |
| Net / gross weight | 160 / 200 kg |
| Packing size | 1260 × 540 × 900 mm (body); 750 × 560 × 150 mm (stand) |
| Loading quantity | 28 pcs per 20-foot container |
The capacity figures are shown in their original documented formats because round, square, and rectangular workpieces place different demands on a saw setup. During technical evaluation, match the relevant listed dimension to the actual stock shape rather than treating the figures as interchangeable. The 90°, 45°, and 60° entries also make it easier to plan which jobs require angled cutting and which remain within the straight-cut range.
Start with the workpiece. Identify whether the planned material is round, square, or rectangular, then check the applicable cutting capacity at the required angle. At 90°, the stated values are 170 mm, 140 × 140 mm, and 210 × 140 mm. At 45°, the stated values are 120 mm, 110 × 110 mm, and 130 × 110 mm. At 60°, the stated values are 70 mm, 60 × 60 mm, and 70 × 60 mm. These figures are selection references, not a substitute for safe setup, blade selection, or an evaluation of the specific material grade.
Next, confirm power. The supplied data lists 900 W for 230 V and 900 W for 380 V, while the speed listing also includes a 110 V value. Ask the supplier to confirm the correct electrical configuration, supplied components, and local compatibility for the order. Finally, consider logistics: the body packing size is 1260 × 540 × 900 mm and the stand packing size is 750 × 560 × 150 mm. With a gross weight of 200 kg, receiving equipment and safe unloading arrangements should be planned before delivery.
Fabrication and maintenance departments may use the documented capacity table as a starting point when reviewing routine cutting of bar, tube, or structural sections. Small and medium production workshops can also use the packing and power data to assess installation practicality. For any application with unusually hard material, demanding tolerances, continuous operation, or a special fixture requirement, verify the full configuration and process conditions before making a purchasing decision.
The G4017 6.5 inch Metal Band Saw Metal Cutting Band Saw Machine is differentiated by the clarity of its supplied core data: model G4017, 900 W motor listings, a 2105 × 20 × 0.9 mm blade, voltage-related speed entries, a 0°–60° swivel range, and capacity values at three angles. This information lets a buyer move from a general product name to a more disciplined evaluation of fit. It is a practical approach for workshops that need to compare a prospective saw with their workpieces, utilities, and handling plan.
Before ordering, review the required voltage, the largest and most frequent workpiece sections, the desired cutting angles, compatible blade supply, installation space, and unloading capability. Confirm any detail not explicitly listed, including included accessories, safety equipment, control arrangement, and final configuration. With those checks completed, the G4017 6.5 inch metal band saw can be assessed using the documented facts that matter most to a metal-cutting workflow.
When reviewing a proposed cutting routine, record the workpiece profile, required angle, electrical supply, and blade specification in the job plan. This simple checklist makes the published capacity table easier to use consistently across operators. It also helps purchasing teams identify questions that need supplier confirmation before installation, particularly where tooling, workholding, or material condition may affect the final cutting process.




