product-g4023-china-metal-band-saw-metal-band-saw-cutting-machine, product-g4023-china-metal-band-saw-metal-band-saw-cutting-machine, /metal-cutting-saw
EN
The G4023 China Metal Band Saw Metal Band Saw Cutting Machine is a documented 9-inch metal band saw for metalworking operations that require straight or angled cuts within the listed capacity range. Its product information identifies an adjustable horizontal/vertical configuration, a swiveling vise, and a bow swivel range from 0° to 60°. Those features give an operator a practical way to approach different workpiece orientations without presenting the machine as a substitute for a process review. Before selecting any metal-cutting machine, compare the actual stock profile, material, fixture arrangement, electrical supply, blade choice, and required cut angle with the published specifications.
This G4023 China Metal Band Saw Metal Band Saw Cutting Machine is presented here from a specification-led viewpoint. The useful question is not simply whether a saw is described as versatile, but whether its stated capacities and electrical versions match the job. For a shop cutting round, square, or rectangular stock, the recorded figures provide a starting point for that comparison. If your work is primarily straight cutting, the 90° figures are the most relevant. If mitre work is part of the workflow, check the 45° and 60° entries against the largest section you expect to cut.
The product description states that the G4023 China Metal Band Saw Metal Band Saw Cutting Machine can be adjusted for horizontal or vertical metalworking band-saw use. It also states that the vise swivels up to 45 degrees, while the bow swivel degree is listed as 0°–60°. These are related but distinct points in the supplied material, so they should be treated as configuration information rather than an assurance that every workpiece can be processed at every angle.
In practice, a swiveling arrangement can be useful when angle cuts are needed, but clamping remains part of the result. A capacity figure does not by itself confirm how a particular irregular, thin-wall, bundled, or poorly supported workpiece will behave. Confirm that the vise and workholding arrangement suit the material shape before operation. That is especially important when the cut is angled, because the available section changes with the stated angle.
| Item | Documented value |
|---|---|
| Model | G4023 |
| Description | 9-inch metal band saw |
| Motor | 1100 W (230 V); 1100/590 W (380 V) |
| Blade size | 2460 × 27 × 0.9 mm |
| Blade speed | 72 m/min (230 V), 87 m/min (110 V), 72/36 m/min (380 V) |
| Cutting capacity at 90° | 220 mm / 220 × 220 mm / 260 × 110 mm |
| Cutting capacity at 45° | 150 mm / 145 × 145 mm |
| Cutting capacity at 60° | 90 mm / 85 × 85 mm |
| Net / gross weight | 220 / 264 kg |
| Packing size | 1450 × 570 × 1040 mm (body); 830 × 780 × 170 mm (stand) |
| 20-foot container quantity | 28 pcs |
The motor and blade-speed values are explicitly voltage dependent. For that reason, do not treat the 230 V, 110 V, and 380 V figures as interchangeable. Verify the intended electrical version with the supplier and confirm the local supply before purchase or installation. Similarly, blade dimensions should be checked when planning replacements, because a blade that does not match the listed 2460 × 27 × 0.9 mm size is outside the documented configuration.

At 90°, the supplied capacities are 220 mm, 220 × 220 mm, and 260 × 110 mm. At 45°, the published values are 150 mm and 145 × 145 mm. At 60°, they are 90 mm and 85 × 85 mm. These figures are best used as a fit check for the relevant stock form, not as a general claim about every possible material grade or cutting condition. When comparing two jobs, a straight cut on a compact section and an angled cut on a longer section may place different demands on support and clamping even when the nominal dimensions appear similar.
The G4023 China Metal Band Saw Metal Band Saw Cutting Machine may be relevant for metal stock cutting where the required section and angle fall within those documented entries. For example, a shop preparing straight cuts may focus on the 90° values; a fabrication task involving a 45° mitre should instead check the 45° capacity first. If your project requires a non-standard fixture, unusually shaped stock, or a cut beyond the stated table, request technical confirmation rather than assuming compatibility.
A sound selection process goes beyond reading the largest number in a table. Review the workpiece cross-section, expected cut angle, voltage, blade availability, access for loading, and the stand or installation layout. It is easy to over-rely on a parameter sheet; however, the actual fit of the workpiece in the vise and the support on either side of the cut can affect whether the documented capacity is useful for a particular job. This is a practical boundary, not a limitation added without reason.
If you value a portable metal bandsaw for frequent movement between work areas, compare that requirement separately with this model’s listed 220/264 kg net/gross weight and its packing dimensions. If instead the priority is fixed-shop capacity and angle cutting, the listed horizontal/vertical configuration and 0°–60° bow range may be the more relevant comparison points. Brake disc and drum skimming machine, rock drilling machine, and plasma cutter cnc are separate equipment categories; they should not be considered equivalent replacements for this band saw.


Potential applications include cutting metal stock at 90°, preparing supported angle cuts at 45°, and handling work within the listed 60° capacity. The source material supports these general applications through its configuration and capacity table, but it does not specify material grades, automated feed functions, tolerance performance, certifications, or optional accessories. Those items should be clarified directly if they are important to your purchasing decision.
For a more dependable purchase review, send the intended workpiece dimensions, material type, cut angles, voltage requirement, and any fixture constraints with your enquiry. Ask which published electrical version applies, confirm what is included with the body and stand packaging, and verify blade supply requirements. This approach makes the specification table more useful than a broad claim of universal capability.
The G4023 China Metal Band Saw Metal Band Saw Cutting Machine differentiates itself in the supplied description through its adjustable horizontal/vertical arrangement, separately stated bow-swivel range, voltage-specific speed information, and angle-by-angle capacity data. Those are concrete decision points that can be checked against a job. Use them together with safe operating practice and supplier confirmation for any requirement not documented here.


