product-g5015v--6-metal-band-saw-metal-cutting-band-saw-machine, product-g5015v--6-metal-band-saw-metal-cutting-band-saw-machine, /metal-cutting-saw
Inquiry
Inquiry

G5015V 6" metal band saw metal cutting band saw machine

Request a Quote
  • Overview

Overview

G5015V Metal Cutting Band Saw Overview

The G5015V 6 inch metal band saw metal cutting band saw machine is a compact horizontal metal-cutting saw built around the confirmed G5015V model. It is intended for workshops that need controlled cutting of round or flat stock within the stated capacity range. The supplied specification identifies a 550 W motor and a 1735 x 13 x 0.65 mm blade. Buyers can use these figures as a starting point when comparing machine fit, blade replacement requirements, and available electrical arrangements.

For daily shop planning, the G5015V 6 inch metal band saw metal cutting band saw machine combines a variable blade-speed range of 20–65 m/min at 50 Hz with a vice tilt stated as 0°–60°. Variable speed gives the operator an adjustment range for the material and cutting task; the correct selection still depends on the workpiece, blade condition, coolant practice, and site procedures. This page does not claim settings beyond the supplied data, so confirm the appropriate cutting setup before production use.

At 90 degrees, the G5015V is listed with a 150 mm round capacity and a 150 x 160 mm flat capacity. At 45 degrees, the listed capacities are 105 mm round and 150 x 105 mm flat; at 60 degrees, the listed round capacity is 65 mm. These stated dimensions make the G5015V 6 inch metal band saw metal cutting band saw machine relevant when a workshop needs a compact saw for repeatable straight or angled stock preparation within those limits.

Confirmed Features

  • 550 W motor specified for the G5015V configuration.
  • Variable blade speed stated as 20–65 m/min at 50 Hz.
  • Published 90°, 45°, and 60° cutting-capacity references.
  • Vice tilt stated from 0° to 60°.
  • Blade size stated as 1735 x 13 x 0.65 mm.

Specifications

Model G5015V
Motor power 550 W
Blade size 1735 x 13 x 0.65 mm
Blade speed (50 Hz) 20–65 m/min, variable
90° capacity 150 mm round; 150 x 160 mm flat
45° capacity 105 mm round; 150 x 105 mm flat
60° capacity 65 mm round
Vice tilt 0°–60°
Net/gross weight 62/65 kg

Selection and Applications

A practical feature of this configuration is the angle-capable vice. Rather than treating angle work as an unsupported promise, users should read the 0°–60° vice-tilt figure together with the individual stated capacities. Workholding, blade selection, material shape, and safe clamping remain important. The supplied facts support a technical, measured approach: choose the machine for work that stays inside the confirmed envelope and validate the process on the actual material.

The listed blade size is 1735 x 13 x 0.65 mm. Keeping the replacement blade specification visible helps maintenance teams plan consumables and avoid substituting an unsuitable size. Blade condition affects cut quality and process control, so inspection and replacement should follow the workshop’s maintenance practice. No blade material, tooth pitch, coolant system, or automatic-feed feature is claimed here because those items are not confirmed in the supplied product material.

For layout and logistics planning, the supplied data lists a net/gross weight of 62/65 kg. Packing dimensions are stated as 930 x 470 x 480 mm for the body and 740 x 540 x 330 mm for the stand. These numbers are useful for evaluating receiving space, internal movement, and installation preparation. Confirm final packing, included components, electrical configuration, and local delivery arrangements with the supplier before placing an order.

The {core} can be considered for fabrication shops, maintenance departments, and small production environments where metal stock needs to be cut before a downstream operation. Typical examples include preparing round bar, flat stock, or angle-cut pieces that fall within the published capacities. Application suitability depends on the actual material grade, wall thickness, desired finish, and throughput, so a buyer should compare those requirements with the confirmed specifications instead of assuming a universal fit.

A second relevant use case is job-shop work where operators move between different sizes or cut angles. The published variable speed range and vice tilt provide the factual basis for discussing flexibility, while the capacity table gives clear boundaries for selection. For a third scenario, maintenance teams may value a compact metal-cutting station for planned repair work, provided the workpiece geometry and safe workholding are checked in advance.

The differentiating value of the G5015V is not an unverified performance claim; it is the combination of stated size, 550 W motor, variable 20–65 m/min blade speed, and published 90°, 45°, and 60° capacities. Presenting those details in one place lets technical buyers compare fit with their own material and process requirements. Ask for current configuration details if your purchase decision depends on optional equipment, compliance documents, or installation support.

When evaluating the G5015V 6 inch metal band saw metal cutting band saw machine, begin with the largest round and flat profiles you need to cut, then compare them with the stated capacity at the required angle. Next, verify the 50 Hz speed information against the local power setup and confirm blade availability using the listed dimensions. Finally, allow for the published machine and stand packing sizes when planning unloading and placement. This approach keeps selection tied to information that is actually available for the G5015V.

The original product material also references product, certificate, exhibition, and factory images. Those images are retained below as supplied. They do not independently establish additional machine specifications or certifications for this listing. For that reason, the product description focuses on the measurable details supplied for the machine and directs buyers to confirm order-specific documentation or configuration before committing to a purchase.

Original Product Images

G5015V Metal Cutting Band Saw Overview

G5015V Metal Cutting Band Saw Overview

G5015V Metal Cutting Band Saw Overview

G5015V Metal Cutting Band Saw Overview

G5015V Metal Cutting Band Saw Overview

Before You Order

Before selecting this saw, review the intended stock diameter, flat dimensions, cut angle, material grade, and required finish. Confirm power compatibility, blade availability, safe installation space, and the exact scope of supply with the seller. The published information supports comparison of the G5015V configuration, while final suitability should be established against your actual process requirements.

G5015V 6" metal band saw metal cutting band saw machine

Request a Quote

Featured Products

product g5015v  6 metal band saw metal cutting band saw machine-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000