product-g5025-horizontal-metal-cutting-sawing-machine, product-g5025-horizontal-metal-cutting-sawing-machine, /metal-cutting-saw
Inquiry
Inquiry

G5025 Horizontal Metal Cutting Sawing Machine

Request a Quote
  • Overview

Overview

G5025 Horizontal Metal Cutting Sawing Machine

The G5025 Horizontal Metal Cutting Sawing Machine is a 10-inch metal band saw for workshops that need a clearly specified machine for straight and angled cutting work. It provides detail. That approach helps a buyer compare the machine with the material profile and installation conditions already present in the workshop.

For a buyer evaluating a G5025 Horizontal Metal Cutting Sawing Machine, the cutting envelope is often more useful than a generic promise about productivity. The source specification lists capacities at 90°, 45°, 60°, and 45° left, so the intended stock shape and required cut angle should be checked before an order is placed. A round, square, or rectangular workpiece can use different values in the same angle row. Confirm the actual workpiece dimensions, fixture arrangement, and cutting process with the supplier before final selection.

Machine Overview

This G5025 Horizontal Metal Cutting Sawing Machine is described as a metal band saw with a 2725 × 27 × 0.9 mm blade. The listed blade speed options are 72 and 36 m/min. Two speeds give the operator a defined pair of settings to consider when planning a cut; they do not by themselves establish suitability for every alloy, section size, blade tooth pitch, coolant arrangement, or production target. Selecting blade and process conditions remains an application decision.

The listed motor value is 1500/750 W at 380 V. Because electrical supply is a site-specific requirement, buyers should verify local voltage, phase, connection requirements, and applicable electrical rules before installation. This is especially important for imported equipment: a machine should not be assumed to match the available supply merely because the physical size and cutting capacity suit the job.

Angle Cutting Range and Capacity

The bow swivel degree is listed from -45° to +60°. This range gives the G5025 Horizontal Metal Cutting Sawing Machine a documented angle-cutting capability beyond a 90-degree cut. The useful capacity still depends on the angle and stock profile. For example, a workshop cutting solid round stock may compare the round capacity first, while a fabricator preparing rectangular sections may focus on the rectangular entries and how the part will be supported during the cut.

Specification Listed value
Model G5025
Description 10-inch metal band saw
Motor 1500/750 W (380 V)
Blade size 2725 × 27 × 0.9 mm
Blade speed 72/36 m/min
Bow swivel -45° to +60°
90° cutting capacity 250 mm; 240 × 240 mm; 310 × 210 mm
45° cutting capacity 200 mm; 180 × 180 mm; 200 × 140 mm
60° cutting capacity 120 mm; 95 × 95 mm; 120 × 95 mm
45° left cutting capacity 150 mm; 150 × 150 mm; 170 × 90 mm
Net/gross weight 341/394 kg

Key Points for Production Planning

  • Defined blade format: The 2725 × 27 × 0.9 mm blade specification provides a concrete starting point for checking blade procurement and replacement compatibility.
  • Two listed speeds: The 72/36 m/min values should be considered with the selected blade, material, and cutting procedure rather than treated as a universal setting.
  • Multi-angle capability: The documented -45° to +60° bow swivel range supports planning for angled stock cuts within the listed capacity table.
  • Capacity by condition: The table separates capacity at 90°, 45°, 60°, and 45° left so a buyer can compare the required angle with the appropriate row.
  • Logistics information: The source lists a body packing size of 1540 × 700 × 1050 mm and a stand packing size of 1100 × 760 × 180 mm.

In practical terms, the G5025 Horizontal Metal Cutting Sawing Machine should be assessed as part of a cutting setup, not as an isolated number on a specification sheet. Workpiece support and clamping deserve attention. A cut-quality issue is not always caused by the saw itself; unsupported stock, unsuitable clamping, an incorrect blade selection, or a process setting outside the job requirement can affect the result. For a first installation, a review of available space, floor loading, electrical supply, access for unpacking, and material handling is a sensible preparation step.

Where the Listed Specifications May Fit

A G5025 Horizontal Metal Cutting Sawing Machine may be considered for metal-cutting work where the required stock dimensions and cut angles fall inside the listed values. One example is a workshop that needs to prepare repeat lengths of metal stock and also requires occasional angled cuts. Another is a fabrication operation comparing a horizontal band saw against its existing stock profiles, blade purchasing plan, and available 380 V supply. These examples describe selection situations, not guaranteed applications or performance outcomes.

The supporting terms brake disc skimmer and standing drill press are included as related workshop-equipment search terms only. They do not describe functions, included accessories, or approved applications of this G5025 Horizontal Metal Cutting Sawing Machine. A buyer seeking those specific machines should request the relevant product information separately rather than infer capability from this page.

Transport and Installation Considerations

The listed net/gross weight is 341/394 kg. Shipping and installation planning should use the supplier-confirmed packing information, lifting method, local handling equipment, and final machine configuration. The source states 22 pieces per 20-foot container, along with separate body and stand package dimensions. Those figures can support early logistics discussions, but packaging, shipment arrangements, and accessories should be reconfirmed for the actual order.

Before commissioning a G5025 Horizontal Metal Cutting Sawing Machine, confirm the electrical specification, placement area, material flow, required blade availability, and safe clamping procedure. This page does not establish local compliance, certification status, tooling inclusion, coolant-system configuration, delivery terms, or final configuration. Asking for a current quotation and technical confirmation is the responsible next step when those details matter to the project.

Request Model-Specific Confirmation

For a clear evaluation, provide the supplier with the material type, stock profile, maximum dimensions, common cutting angles, expected work pattern, available power, and destination requirements. The G5025 Horizontal Metal Cutting Sawing Machine can then be checked against the documented specification and the buyer's operating conditions. This fact-led approach keeps the selection process focused on verifiable machine data instead of assumptions.

g5025-800-2.jpgG5025kou-800(1).webp(1)(1).jpg-800.jpg_01

G5025 Horizontal Metal Cutting Sawing Machine

Request a Quote

Featured Products

product g5025 horizontal metal cutting sawing machine-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000