product-mini-metal-engraving-machine--2015, product-mini-metal-engraving-machine--2015, /cnc-milling-machine
Inquiry
Inquiry

Mini Metal Engraving Machine 2015

The 2015 mini metal engraving machine offers original Taiwan guide rails, C5 ballscrews, a 2.2kW 24,000 RPM spindle, 400W servo drives on all axes, ≤0.005mm positioning accuracy, ±0.0008mm repeat accuracy, and DDCSE control for engraving and light milling.

Request a Quote
  • Overview

Overview

Mini Metal Engraving Machine 2015 — Compact CNC Precision for Metal Fabrication

The Mini Metal Engraving Machine 2015 is a professional CNC machining center for small-footprint metal workshops. Equipped with original Taiwan linear guide rails, C5 ballscrews, a 2.2 kW spindle at 24,000 RPM, and 400 W servo motors on all three axes, this mini metal engraving machine delivers positioning accuracy of ≤0.005 mm and repeat accuracy of ±0.0008 mm. The DDCSE control system and ER20 spindle taper support both fine metal engraving and light CNC milling operations in a single compact platform.

800_20250106145928.jpg800_20250106145937.jpg800_20250106145948.jpg800_20250106150016.jpg800-20250106145937.jpg

Technical Specifications

MODEL 2015
XYZ Stroke 220 × 150 × 110 mm
Linear Guideway Original Taiwan 20 guide rail
Ballscrew Original Taiwan 16 ballscrew C5
CNC System DDCSE system
Spindle Motor Power 2.2 kW
Spindle Speed 24,000 RPM
Spindle Taper ER20
XYZ Axis Motor 400 W SERVO
Table Size 240 × 200 mm
Max. Load 15 kg
T Slot M8 × 60 × 3
XYZ Fast Moving Speed 10 / 10 / 8 m/min
Cutting Feed Speed 1–8,000 mm/min
Position Accuracy ≤0.005 mm
Repeat Position Accuracy ±0.0008 mm
Packing Size 900 × 700 × 1,050 mm
Net / Gross Weight 200 / 220 kg
Voltage 220 V
Total Power 2.5 kW
Spindle Cooling Submerged pump

Key Features

1. Taiwan Linear Guide Rails and C5 Ballscrews

The Mini Metal Engraving Machine 2015 uses original Taiwan size-20 linear guide rails and size-16 C5 ballscrews on all axes. Guideway grade is the primary mechanical factor in long-term accuracy retention. C5 classification ensures minimal axial backlash, forming the foundation for the ±0.0008 mm repeat positioning figure. Buyers who overlook guideway specification often find positional drift within months, typically traced to non-graded ballscrews that are difficult to replace without a full drivetrain rebuild.

2. 2.2 kW Spindle at 24,000 RPM with Submerged Cooling

A common misconception is that higher spindle RPM always improves results. For cnc metal cutting on aluminum or steel, thermal stability and torque at working speeds matter more than peak RPM. The 2015 mini metal engraving machine manages spindle heat through a submerged coolant pump, maintaining consistent operating temperature during extended runs. The ER20 taper supports engraving cutters and end mills from a standard tooling ecosystem.

3. Full-Axis 400 W Servo Drive

All XYZ axes use 400 W servo motors with closed-loop feedback, compensating for load changes in real time. Unlike open-loop steppers, this maintains commanded position through variable cutting depths. Shops using a vertical lathe and adding milling capability will find servo behavior predictable and g-code compatible. Rapid traverse at 10/10/8 m/min supports productive cycle times across small-batch runs.

4. DDCSE CNC System with Standard G-Code Input

The DDCSE system accepts standard g-code, integrating into existing CAM workflows without proprietary post-processors. For shops operating a swiss turning machine or vertical lathe and expanding into metal engraving, this eliminates additional programming software. Single-phase 220 V supply simplifies installation where three-phase power is unavailable, reducing site preparation requirements for new installations.

5. 240 × 200 mm Worktable in a Compact Frame

The 2015 ships in a 900 × 700 × 1,050 mm envelope at 200 kg net — a rigid cast frame in a small footprint. The worktable with M8 × 60 mm T-slots holds workpieces up to 15 kg using standard vises or fixture plates. For shops evaluating a small 5 axis cnc milling machine alongside dedicated engravers, the 2015 delivers floor-space efficiency without sacrificing the structural rigidity required for consistent cnc metal cutting accuracy.

Application Scenarios

Precision Metal Engraving and Part Marking

The Mini Metal Engraving Machine 2015 suits serial number marking, logo engraving, and part identification on aluminum, brass, copper, and mild steel. For a shop marking 50–100 aluminum enclosures daily, ±0.0008 mm repeat accuracy ensures consistent placement without re-registration between parts. The ER20 taper covers cutters from 1 mm diameter, supporting V-groove and flat-bottom text in the same setup.

Light CNC Metal Cutting and Secondary Milling

Beyond engraving, the 2015 handles pocket milling, profiling, face milling, and drilling on aluminum and copper. Compared to a small 5 axis cnc milling machine or swiss turning machine, it trades multi-axis capability for higher positional accuracy and lower power draw at 2.5 kW. For secondary milling on parts turned on a vertical lathe — milling a flat, drilling a cross-hole — the 2015 provides a compact in-house station.

Prototype Development in Small Workshops

Design shops prototyping metal components benefit from a mini metal engraving machine that handles CAD-to-part workflows in-house. Standard g-code input, ≤0.005 mm positioning accuracy, and feed rates from 1 to 8,000 mm/min support varied materials without reconfiguration. The 2015 shortens development cycles and removes outsource dependency for small precision metal parts.

Differentiated Advantages

Traceable Drivetrain Components

The Mini Metal Engraving Machine 2015 specifies Taiwan C5-grade ballscrews and size-20 Taiwan guide rails explicitly. C5 ballscrews hold tighter lead error and axial play tolerances than C7 or unrated equivalents, a distinction measurable in accuracy retention over high-cycle production. This allows buyers to verify component standards rather than relying solely on a parameter sheet.

Metal-Specific Design Priorities

CNC engraving machines for metal require different design priorities than those for wood or acrylic. The 2015 addresses this with a submerged coolant pump, servo-driven axes, a 15 kg table load rating, and a 200 kg cast frame. These choices counter the failure modes common in lighter-duty cnc metal cutting equipment: thermal spindle drift, positional slip under load, and table deflection on heavier workpieces.

Factory Direct Background

The Mini Metal Engraving Machine 2015 is built at a vertically integrated factory in Chizhou, Anhui Province, covering casting through final assembly. Taiwan guide rails and C5 ballscrews come from traceable suppliers. For international buyers, direct factory sourcing provides clearer access to spare parts, technical documentation, and support compared to trading company channels.

Our Certificate

certificate.jpg

OUR EXHIBITION NEW

Backup_of_.jpg

Company Information

our factory.jpg

Mini Metal Engraving Machine 2015

The 2015 mini metal engraving machine offers original Taiwan guide rails, C5 ballscrews, a 2.2kW 24,000 RPM spindle, 400W servo drives on all axes, ≤0.005mm positioning accuracy, ±0.0008mm repeat accuracy, and DDCSE control for engraving and light milling.

Request a Quote

Featured Products

product mini metal engraving machine  2015-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000