product-qt-15z---13mm-mini-swiss-cnc-lahte-sliding-headstock-cnc-lathe, product-qt-15z---13mm-mini-swiss-cnc-lahte-sliding-headstock-cnc-lathe, /swiss-type-cnc-lathe
Inquiry
product-qt-15z---13mm-mini-swiss-cnc-lahte-sliding-headstock-cnc-lathe, product-qt-15z---13mm-mini-swiss-cnc-lahte-sliding-headstock-cnc-lathe, 
Inquiry

QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe

Request a Quote
  • Overview

Overview

QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe

QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe is a compact sliding-headstock CNC lathe offered for buyers reviewing small-diameter turning work. The supplied configuration states a maximum machining diameter of 13 mm, so a drawing review should start with the actual stock and finished-part envelope. It is a machine description rather than a promise of accuracy, output, or suitability for every alloy.

For QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe, the listed 15 mm spindle bore and 0–5000 rpm spindle-speed range provide concrete points for a process discussion. Spindle speed is not a stand-alone selection answer: material, tool geometry, stock support, coolant practice, and cutting conditions also affect a practical result.

The supplied 2.3 kW spindle motor is part of the published QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe configuration. Buyers can compare that figure with their intended operation, but should not infer an unsupported torque curve, material range, or cycle time from motor power alone.

Supplied Specifications

Item Supplied specification
Maximum machining diameter 13 mm
Spindle bore 15 mm
Spindle speed range 0–5000 rpm
Spindle motor power 2.3 kW
X / Y / Z travel 60 / 135 / 140 mm
Turning / front drilling tools 6 / 4
Machine weight / size 800 kg / 1250 × 800 × 1800

Configuration Features

  • 15 mm stated spindle bore
  • Six listed turning tools and four listed front drilling tools
  • Fixed or rotating guide-bushing modes listed
  • Taiwan LNC system identified in supplied data
  • Optional one to three power heads for drilling, milling, and tapping

Machine travel matters when planning QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe. The stated X-, Y-, and Z-axis travels are 60 mm, 135 mm, and 140 mm respectively. Check the machining sequence, clearances, and tool approach against the workpiece before selecting a configuration.

For QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe, the source lists six turning tools and four front drilling tools. This gives a useful starting point for reviewing the planned operation order. Toolholder, collet, drill-shank, fixture, and accessory compatibility should be confirmed for the selected process.

The published tool size for QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe is 10 × 10. That value belongs in the tooling review, alongside the actual cutting tools and holder arrangement. A specification table cannot establish compatibility with every existing shop tool system.

The source identifies a Taiwan LNC system for QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe. Confirm programming requirements, operator familiarity, interfaces, service support, and the exact controller supplied with a commercial quotation rather than assuming features not stated here.

Fixed and rotating guide-bushing modes are listed for QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe. The appropriate choice depends on the stock, part form, and machining sequence. A guide-bushing choice should therefore be made with the part drawing and planned tooling available.

One to three power heads are described as optional for drilling, milling, and tapping on QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe. Optional means the equipment must be included explicitly in the technical and commercial scope; it should not be assumed from the base machine description.

The stated physical size of QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe is 1250 × 800 × 1800, with a listed weight of 800 kg. These figures can support an early layout discussion for a compact workshop, while local floor loading, access, lifting, electrical supply, and installation requirements still need site confirmation.

Application, Process Fit, and Selection Review

For a buyer comparing QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe with another compact lathe, a useful approach is to start with the part family rather than the longest feature list. A higher option count is not automatically a better fit when the required operation can be supported by a simpler, verified configuration.

A practical evaluation of QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe can include a representative sample part. This helps connect the stated diameter capacity, travel values, guide-bushing selection, and tooling plan with real material behavior. It also avoids treating paper specifications as a substitute for process validation.

QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe may be considered for small-diameter turned parts that remain within its supplied 13 mm maximum machining diameter. Where a part needs drilling, milling, or tapping, request the detailed power-head configuration and verify the intended sequence before relying on those operations.

In a compact production-cell review, QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe offers stated dimensions that can be compared with available floor space. This is only one input: leave room for bar handling, maintenance access, chip management, material flow, and safe operator movement.

For repeat work, QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe should be matched to a documented process plan. Include stock condition, tolerance expectations, workholding, tool life, inspection method, and changeover needs. These factors often determine the usable outcome more directly than an isolated catalog number.

QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe is best presented with clear limits. The supplied material does not establish certifications, delivered tooling, automation capability, tolerance guarantees, production rates, lead times, or suitability for a particular material. Confirm those items separately where they affect the purchase decision.

Buyers assessing QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe can use the 1–5000 mm/min stated cutting-speed range and 18000 mm/min axial feed velocity as reference data. Final programmed values require process-specific engineering and should be proven under representative conditions.

The listed 930 mm spindle height from ground on QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe can inform an ergonomic and installation review. It does not replace a complete assessment of guarding, operator reach, utility routing, local regulations, or the final site plan.

Original Product Images

Original Product Images

Original Product Images

Original Product Images

Original Product Images

Original Product Images

QT-15Z 13mm Mini Swiss cnc lahte sliding Headstock CNC Lathe

Request a Quote

Featured Products

product qt 15z   13mm mini swiss cnc lahte sliding headstock cnc lathe-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000