product-small-mini-milling-machine-brushless-motor-tm16blwith-tapping-function-belt-drive-mini-milling-machine, product-small-mini-milling-machine-brushless-motor-tm16blwith-tapping-function-belt-drive-mini-milling-machine, /bench-drilling-milling-machine
Inquiry
product-small-mini-milling-machine-brushless-motor-tm16blwith-tapping-function-belt-drive-mini-milling-machine, product-small-mini-milling-machine-brushless-motor-tm16blwith-tapping-function-belt-drive-mini-milling-machine, 
Inquiry

Small Mini Milling Machine Brushless Motor TM16BLwith Tapping Function Belt Drive Mini Milling Machine

Request a Quote
  • Overview

Overview

TM-16BL Small Mini Milling Machine

The TM-16BL is a manual benchtop milling machine presented for workshops that need a compact machine with a brushless motor, belt-drive arrangement, and a footbrake tapping function. The source material identifies this model as a Small Mini Milling Machine Brushless Motor TM16BLwith Tapping Function Belt Drive Mini Milling Machine. It is intended as a product introduction rather than a promise of a particular machining result: final suitability depends on the workpiece, tooling, setup, operator practice, and selected configuration.

For a buyer comparing compact equipment, the useful starting point is not simply the longest feature list. It is whether the available specifications and accessories fit the jobs that will actually be done. The TM-16BL combines a 600 W brushless motor with belt drive, while the supplied product material describes the belt-drive design as lower-noise. This makes the product information especially relevant when a purchaser wants to review a compact manual milling platform and its available options before requesting a quotation.

16.png

Confirmed Product Information

Model TM-16BL
Motor 600 W brushless motor
Power shown in source image 220 V
Table size shown in OCR 500 x 140 mm
Spindle taper shown in OCR MT2
Speed shown in OCR 2500 r/min
Drive Belt drive
Tapping feature Footbrake tapping function

These values are reproduced from the existing product description and product images. They should be confirmed in the final specification sheet because supplied accessories and electrical arrangements may vary by order. In particular, buyers should verify the voltage, included tooling, table feed requirements, and the exact scope of any optional equipment before purchase.

Key Features

Brushless motor power

The source lists a 600 W brushless motor and describes stronger torque. In practical selection terms, motor output is one part of the decision; tool condition, material, depth of cut, workholding, and operating method also affect the result. If your priority is reliable matching rather than a broad headline claim, ask for the recommended operating conditions for your intended work.

Belt-drive arrangement

The belt-drive design is presented as a lower-noise feature. For a small workshop or a planned compact equipment area, this can be a useful discussion point, but it should not be treated as a measured noise guarantee. Buyers can request operating video or configuration confirmation when sound level is a critical purchasing criterion.

Footbrake tapping function

The TM-16BL is listed with a footbrake tapping function. This feature is relevant for buyers who want to discuss tapping workflow as part of a manual milling setup. It does not replace safe operating procedures, suitable tapping tools, or operator training. Confirm the tapping range and the recommended tooling for your application before placing an order.

3-axis DRO availability

A 3-axis DRO is described as available, and it is also listed among optional accessories. Availability does not mean it is included in every machine package. A practical purchase request should state whether a DRO is required and ask the supplier to identify the exact supplied configuration.

16BL-800.jpg16bl-800.jpg

Standard Accessories Listed in the Source

The original description lists a speed display, depth ruler, key-type drill chuck with arbor, tool box, wrenches, oil gun, and draw bar as standard accessories. This list is retained as source-based information. It is sensible to request an itemized packing list because accessory naming and inclusion can differ with order configuration or destination requirements.

  • Speed display
  • Depth ruler
  • Key-type drill chuck with arbor
  • Tool box and wrenches
  • Oil gun
  • Draw bar

Optional Equipment and Configuration Review

The source also lists a stand and oil tray, 3-axis DRO, table auto feeder, HSS end mills, a 58-piece tool clamping kit, an 80 mm machine vice, an ER25 milling chuck set, and coated HSS end mills among optional accessories. More equipment is not automatically better. For a compact manual milling setup, the better choice is the configuration that matches the workholding, tools, available floor space, and planned tasks.

Before ordering, review compatibility between the MT2 spindle arrangement, the required arbor or chuck, existing toolholders, clamps, and vice. A machine purchase can become more expensive when the workholding and tool interfaces are not reviewed early. Where a non-standard package is needed, request a clear quotation describing the selected items rather than assuming every illustrated component is included.

16-2.png

Where This Product Information Helps

This product page is most useful for a buyer, distributor, or workshop planner evaluating a small manual milling machine with a documented brushless motor, belt drive, and tapping feature. It can support an initial equipment comparison, a compact workshop planning conversation, or an accessory-package inquiry. It does not establish capacity for a particular material, tolerance, production volume, or unattended operation; those points require a direct technical confirmation.

For example, a buyer planning to use a machine vice and end mills should confirm the actual package and the tooling interface before purchase. A buyer considering an optional DRO or table auto feeder should ask which version is offered, how it is supplied, and whether installation is included. This is a more dependable route than selecting solely from an image or a short accessories list.

Buyer Checklist

  • Confirm the TM-16BL model and final electrical specification.
  • Confirm the 500 x 140 mm table, MT2 taper, and shown speed information against the order sheet.
  • Request the standard accessory packing list.
  • Identify which optional accessories are required.
  • Check chuck, arbor, toolholder, clamp, and vice compatibility.
  • Discuss your workpiece material, tooling, and intended tapping needs with the supplier.

The TM-16BL information is designed to make that conversation clearer. For final selection, use the confirmed technical offer and order documentation as the controlling source.

Supplier Reference Images

certificate.jpgexhibition.jpg_01

Small Mini Milling Machine Brushless Motor TM16BLwith Tapping Function Belt Drive Mini Milling Machine

Request a Quote

Featured Products

product small mini milling machine brushless motor tm16blwith tapping function belt drive mini milling machine-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000