product-t8014a-cylinder-boring-machine, product-t8014a-cylinder-boring-machine, /auto-maintenance-repair463
Inquiry
Inquiry

T8014A Cylinder Boring Machine

Request a Quote
  • Overview

Overview

T8014A Cylinder Boring Machine Overview

The T8014A Cylinder Boring Machine is a compact engine-service machine for reboring engine cylinders in automobiles, motorcycles, and tractors. It is intended for workshops that need a clearly specified boring setup rather than a generic, unsupported performance promise. The model combines a listed Φ65–Φ140 mm boring diameter range with a maximum boring depth of 300 mm. For buyers comparing equipment for established repair work, the T8014A Cylinder Boring Machine provides a practical starting point for reviewing fit against the cylinders and workflow already handled in the shop.

A technical purchase decision begins with the workpiece. The T8014A Cylinder Boring Machine is described for engine-cylinder reboring, so the stated diameter range should be checked against the actual cylinder sizes planned for service. Its two listed spindle speeds, 250 and 380 r/min, give operators documented operating options. The listed spindle feed is 0.11 mm/r, while spindle rapid reset is 636 mm/min. These values are presented as source specifications, not as a claim about a particular finish, cycle time, or output under every material and tooling condition.

For a workshop evaluating an engine-boring station, the T8014A Cylinder Boring Machine keeps the core information visible. The machine lists 220 V / 380 V voltage options, a 0.25/0.37 kW motor output, and a motor speed of 1440 r/min. Confirm the available power supply and installation requirements before ordering. The source material does not state tooling compatibility, included accessories, automation, or site commissioning details; these points should be confirmed with the supplier for the intended application.

Specifications

Verified operating specifications are organised below so buyers can compare the T8014A Cylinder Boring Machine with their own work requirements. Maintaining the original values helps purchasing and service teams identify the facts that need confirmation before a final tooling or installation decision.
Specification Listed value
Model T8014A
Boring diameter Φ65–Φ140 mm
Maximum boring depth 300 mm
Spindle speed 250, 380 r/min
Spindle feed 0.11 mm/r
Spindle rapid reset 636 mm/min
Voltage 220 V / 380 V
Motor output 0.25/0.37 kW
Motor speed 1440 r/min
Overall dimensions 320 × 330 × 850 mm
Package size 540 × 470 × 1030 mm
Net/gross weight 75/105 kg

Features and Applications

The T8014A Cylinder Boring Machine has several source-supported points that can be useful in a straightforward equipment review. First, the stated boring range provides a defined basis for matching the machine to applicable engine-cylinder dimensions. Second, the 300 mm maximum depth is a clear dimensional reference. Third, the two listed spindle speeds support a simple operating setup. Fourth, the source describes easy and flexible operation. Finally, the compact overall dimensions can help a workshop assess available floor space; installation clearance and handling provisions still need to be planned locally.

Applications for the T8014A Cylinder Boring Machine are limited to the source-described engine-cylinder reboring work. It may be considered for automotive engine service, motorcycle engine service, and tractor engine service when the relevant cylinder dimensions fit the published range. Actual suitability depends on the component, bore condition, tooling, operator procedure, and local shop practices. This page does not represent the machine as suitable for every engine or as a substitute for inspection, measurement, and correct process control.

A disciplined evaluation of the T8014A Cylinder Boring Machine should include more than the headline model number. Compare the Φ65–Φ140 mm range and 300 mm depth with the work already accepted by the shop. Verify whether 220 V or 380 V is available at the installation location. Review the machine footprint of 320 × 330 × 850 mm, and allow for access, tooling, workholding, and safe operation around the equipment. The listed package size and 75/105 kg net/gross weights can also assist with receiving and transport planning.

Selection Notes

The T8014A Cylinder Boring Machine is presented with a restrained, specification-led approach. The original material cites reliable performance, high processing accuracy, productivity, good rigidity, and cutting capacity, but does not quantify those statements. Therefore, buyers should treat them as general product-positioning language and request application-specific confirmation if a decision depends on tolerance, material, throughput, or included tooling. This distinction keeps a technical conversation focused on what the published data supports and what requires a supplier response.

For day-to-day planning, the T8014A Cylinder Boring Machine should be reviewed as part of a complete reboring process. A workshop may need to consider measuring equipment, cutting tools, workholding, setup procedures, and operator training separately, because the available source material does not define these items. The listed 250 and 380 r/min spindle speeds and 0.11 mm/r feed are useful reference values, but they do not remove the need to select settings appropriate to the component and process. Ask for current configuration details before purchase.

The T8014A Cylinder Boring Machine offers a clear model identity and a compact published specification set for engine-service buyers. Its differentiating value on this page is not an unverified claim of universal capability; it is the availability of specific range, depth, speed, feed, power, dimension, and weight data in one place. This makes it easier for a buyer to prepare a focused inquiry and compare the machine with existing workshop requirements.

Before requesting a quotation, provide the intended cylinder diameter range, expected boring depth, available voltage, delivery destination, and any questions about accessories or tooling. Referencing the T8014A Cylinder Boring Machine model together with these application details can help the supplier respond with the relevant configuration information. Confirm the current specification, included scope, lead time, and support terms directly, since this page only reflects the product information supplied for this listing.

During setup, verify that the bore range, required depth, electrical supply, machine location, lifting plan, and operator access match the workshop plan. Keep service records for cutters, measurements, and routine maintenance. These checks do not add machine capabilities; they help the buyer use the published specifications as a practical basis for a controlled purchasing discussion before finalizing the order directly.

Product Images

T8014Aaccessories-800.jpgT8014accessories-1-800.jpgT808A.jpg

(1)(1).jpg-800.jpg_01

T8014A Cylinder Boring Machine

Request a Quote

Featured Products

product t8014a cylinder boring machine-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000