product-t8445a--brake-disc--and-drum--lathe-machine937, product-t8445a--brake-disc--and-drum--lathe-machine937, /auto-maintenance-repair463
EN
The T8445A is a purpose-built brake disc and drum lathe with three spindle speeds (30/54/80 rpm), dual feed rates (0.16/0.30 mm/r), 180–450mm drum and 420mm rotor capacity, single-clamping dual-face turning, and 1.1/1.5kW motor options.

Single-speed brake lathes force a compromise: the spindle setting that stops chatter on a corroded drum does not produce the right surface on a precision rotor. The T8445A Brake Disc and Drum Lathe Machine eliminates that trade-off. Three selectable spindle speeds — 30, 54, and 80 rpm — plus dual feed rates at 0.16 mm/r and 0.30 mm/r let operators match parameters to each part. Drum capacity runs from 180 to 450 mm; maximum rotor diameter is 420 mm. The November 2024 update over the predecessor T8445 introduced a redesigned tool post, the three-speed spindle system, and dual-feed control — each targeting a documented failure mode of fixed-speed brake lathe operation. For shops that also run a jig boring machine or a general cnc turning center, the T8445A Brake Disc and Drum Lathe Machine fills the brake resurfacing gap those machines are not designed to cover.

The headstock of the T8445A Brake Disc and Drum Lathe Machine is cast iron throughout, with hardened spindle bearings sized for the lateral loads produced during drum and rotor cutting. Cast-iron construction is one of the most critical factors distinguishing a purpose-built brake lathe from adapted general-purpose equipment. On drums above 350 mm, the difference between a rigid cut and a deflecting cut becomes visible in the finished surface and in whether the part holds OEM parallelism tolerances. In the precision machining industry, this rigidity standard is what separates equipment rated for continuous resurfacing work from machines that only perform well on the first part of a shift.

Many operators assume higher spindle speed always improves surface finish. In brake resurfacing, that assumption fails for high-mileage drums. A corroded, out-of-round drum at 80 rpm produces unstable chip formation and shortened insert life. At 30 rpm, the same drum cuts cleanly with predictable engagement. The T8445A Brake Disc and Drum Lathe Machine gives operators three choices: 30 rpm for corroded or high-mileage drums; 54 rpm for standard passenger car rotors in moderate condition; 80 rpm for lightly worn luxury vehicle rotors with tight finish specifications. Shops that have run single-speed machines through mixed workloads notice the insert life difference quickly — the speed is matched to the condition, not forced across the full range from one fixed setting. For buyers comparing this machine with a bl505 brake lathe, the three-speed spindle is the most direct operational difference to evaluate.

The T8445A Brake Disc and Drum Lathe Machine cuts both rotor faces in a single clamping, the most reliable method for achieving parallel faces. Repositioning between face cuts introduces parallelism error that produces pedal pulsation after service. Feed rate is independent of spindle speed: 0.16 mm/r for finishing passes, 0.30 mm/r for roughing. In the precision machining industry, matching the feed to actual part condition — rather than defaulting to the tightest setting — is how cycle time and surface quality are balanced across a production shift. The same feed-control principle applies whether the shop runs a jig boring machine, a cnc turning center, or this T8445A Brake Disc and Drum Lathe Machine.
Operating range for drums: 180–450 mm. Maximum rotor diameter: 420 mm. Spindle speeds: 30, 54, and 80 rpm. Tool post travel: 170 mm. Motor options: 1.1 kW or 1.5 kW. Feed rates: 0.16 mm/r and 0.30 mm/r. Overall dimensions: 690×890×880 mm. Net weight: 260 kg; gross: 290 kg. HS export code: 8458190000. Standard export packaging: reinforced plywood crate, 0.54 CBM. These ratings position the T8445A Brake Disc and Drum Lathe Machine for passenger and light commercial vehicle brake service rather than general-purpose machining.

Service bays handling compact cars, sedans, and SUVs need a lathe with enough drum range to cover each vehicle type without adapter changes per job. The T8445A Brake Disc and Drum Lathe Machine covers 180–450 mm drums and rotors to 420 mm across one setup. Footprint is 690×890×880 mm at 260 kg net, fitting a standard bay without floor modification.
Rebuilders running extended batch operations need consistent behavior across a full shift, not peak performance on the first part. The T8445A Brake Disc and Drum Lathe Machine's selectable spindle speed and lead-screw feed keep per-part consumable cost predictable. Motor options at 1.1 kW and 1.5 kW support sustained runs.
Equipment dealers should build conservative delivery buffer into timelines. Port clearance and inland logistics consistently add days beyond quoted lead times — being undersupplied during peak service season creates a gap that takes weeks to recover. Compatible service models: C9335, C9335A, C9340, C45B, T8445, T8445FVC, T8465, T8465FCV, C9350C, C9370C, C9365, C9372. Dealers stocking a cnc turning center alongside automotive service equipment will find the T8445A Brake Disc and Drum Lathe Machine complements a mixed equipment catalog.
Three-speed spindle, single-clamping dual-face turning, and the 2024 tool post upgrade together reduce the main sources of brake lathe callbacks: surface inconsistency from fixed-speed operation, parallelism error from sequential face cuts, and tool post instability on larger rotors. Dealers comparing options — including units such as the bl505 brake lathe — should note that the three-speed spindle with single-clamping dual-face capability is uncommon at this tier. Unlike a jig boring machine or general cnc turning center, the T8445A Brake Disc and Drum Lathe Machine is purpose-built for brake resurfacing work: each design feature targets a specific operational failure mode. Manufactured by Chizhou New Dragon Machinery Co., Ltd., Chizhou, Anhui, China. Exported globally.

Adapter equipment for common vehicle configurations ships as standard with the T8445A Brake Disc and Drum Lathe Machine. Confirm compatibility requirements before placing your order.


Reinforced plywood crate. 690×890×880 mm, 0.54 CBM. Net 260 kg, gross 290 kg. The T8445A Brake Disc and Drum Lathe Machine ships with anti-shock cushioning for sea or air freight.



Chizhou New Dragon Machinery Co., Ltd., No. 614 Jiuhuashan Road, Guichi District, Chizhou, Anhui, China. Exports the T8445A Brake Disc and Drum Lathe Machine globally. Alibaba: czxlt.en.alibaba.com.
The T8445A is a purpose-built brake disc and drum lathe with three spindle speeds (30/54/80 rpm), dual feed rates (0.16/0.30 mm/r), 180–450mm drum and 420mm rotor capacity, single-clamping dual-face turning, and 1.1/1.5kW motor options.