product-the-economic-disc-/drum-brake-cutting-lathe-machine-for-cars-and-trucks-c9365a, product-the-economic-disc-/drum-brake-cutting-lathe-machine-for-cars-and-trucks-c9365a, /auto-maintenance-repair463
EN
The Economic Disc /drum Brake Cutting Lathe Machine for Cars and Trucks C9365A is a workshop brake-disc service machine described for buses and high-speed passenger cars. It is intended for buyers who need a defined C9365A model and want to compare real machine data with the discs, fixtures, electrical supply, and installation conditions in their own workshop. The source material identifies an electric power feed with infinitely variable adjustment in either direction and the ability to turn two brake-disc faces simultaneously.
For a purchasing team, the useful starting point is the actual service range rather than a long list of assumed capabilities. The Economic Disc /drum Brake Cutting Lathe Machine for Cars and Trucks C9365A has a stated brake-disc processing diameter of 180–480 mm. Confirm the disc diameter, workpiece condition, and workholding arrangement against that range before selecting the machine for a specific job.
Many buyers initially compare machine categories by the longest feature list. In brake-disc service, however, fit between the disc, fixture, tooling, operator procedure, and installation space is usually more useful than assuming that unrelated lathe or milling functions will improve the result. This C9365A model should be evaluated as the specific brake-service machine described here, not as a substitute for an unspecified general-purpose machine tool.
| Specification | Value |
|---|---|
| Model | C9365A |
| Brake-disc processing diameter | 180–480 mm |
| Work-piece rotating speed | 30 / 49 / 88 r/min |
| Maximum tool travel | 256 mm |
| Motor power | 1.1 kW |
| Overall dimensions | 1320 × 1200 × 920 mm |
| Packing dimensions | 1220 × 1130 × 1210 mm |
| Net / gross weight | 400 / 500 kg |
These figures are retained from the supplied product information. They give a practical basis for reviewing disc size, floor space, delivery access, and handling arrangements. They do not establish suitability for every vehicle, disc design, fixture, electrical supply, or local operating requirement. If your project needs an unlisted option, certification, voltage configuration, or performance outcome, request written confirmation rather than treating it as included.
The C9365A model is described for bus brake discs. Before purchase, review the actual diameter, the loading and clamping approach, and the route for moving a 400 kg net-weight machine into position. The stated overall dimensions are 1320 × 1200 × 920 mm, so a site measurement should include operating access as well as the machine footprint.
The source also identifies high-speed passenger cars as an application. This describes the intended vehicle category, but it does not confirm compatibility with every individual disc geometry. A workshop should verify the workpiece, fixture, cutting tools, and approved service procedure for the specific vehicle being serviced.
For a workshop replacing existing brake-service equipment, compare the current disc range and workholding process with the documented C9365A values. For example, a shop may find that delivery clearance, packing dimensions, or power preparation affects implementation as much as the nominal processing range. The documented C9365A specifications support that review without claiming optional accessories or unlisted capabilities.
Configuration alone does not determine whether a machine is appropriate. If the priority is routine work within the listed 180–480 mm range, start with disc dimensions and fixture compatibility. If the work requires a special setup, confirm the arrangement before ordering. This is especially important where existing tooling is being reused: a machine purchase can require unexpected adaptation if the workholding plan has not been reviewed early.
Installation preparation deserves the same attention. The packing dimensions are 1220 × 1130 × 1210 mm and gross weight is 500 kg. Measure the receiving route, the planned location, and the available clearance before delivery. Review floor capacity, lifting method, local electrical requirements, and normal operator access with qualified personnel. The 1.1 kW motor rating is a listed machine fact; it does not replace confirmation of the local supply and installation requirements.
A practical comparison is therefore not simply “more features versus fewer features.” For a workshop that services discs inside the stated range, the more relevant question is whether the machine, disc, fixture, tooling, installation area, and operating process align. The Economic Disc /drum Brake Cutting Lathe Machine for Cars and Trucks C9365A is best considered through that compatibility checklist.
The Economic Disc /drum Brake Cutting Lathe Machine for Cars and Trucks C9365A offers a defined reference point for brake-disc workshop planning. Its stated feed arrangement, simultaneous two-face turning capability, speed options, and documented dimensions allow buyers to assess the model against real service conditions while keeping unverified assumptions out of the decision.
Keep the documented values with the quotation review: disc range, speed options, travel, motor power, dimensions, packing size, and weight. They help separate confirmed machine information from requirements that still need supplier confirmation. A short pre-delivery checklist shared by purchasing, facilities, and the service team can identify clearance or electrical questions before the machine reaches the workshop.







