product-tl250mv500mm-variable-speed--26mm-spindle-bore-mini-metal-bench-lathe, product-tl250mv500mm-variable-speed--26mm-spindle-bore-mini-metal-bench-lathe, /bench-lathe
EN
The TL250MV*500mm Variable Speed 26mm Spindle Bore Mini Metal Bench Lathe is a compact manual machine for workshop turning, facing, and threading work that stays within its published operating envelope. Its 250 mm maximum swing over bed, 500 mm maximum workpiece length, and 26 mm spindle bore give buyers clear starting points for matching parts, workholding, and tooling. This page uses the manufacturer’s published data rather than promising a result for every material or setup.
For the TL250MV*500mm Variable Speed 26mm Spindle Bore Mini Metal Bench Lathe, start with the part rather than the headline speed. A workpiece can fit the nominal swing and still require clearance for a chuck, toolholder, tailstock support, or a steady rest. Check outside diameter, finished length, bar or tube passage, and the intended fixture together. The listed spindle taper is MT4 and the tailstock sleeve taper is MT3; tooling compatibility should be confirmed before an order is finalized.
The published spindle-speed range is 30–1600 r/min. Higher speed is not automatically the better choice: material, diameter, tool geometry, rigidity, and desired finish all matter. For a small workshop producing varied parts, this variable-speed range can be evaluated as one part of the setup, not as a standalone capability claim.
| Maximum swing over bed | 250 mm |
|---|---|
| Maximum workpiece length | 500 mm |
| Maximum swing over cross slide | 150 mm |
| Maximum cross-slide travel | 130 mm |
| Longitudinal stroke over tool post | 60 mm |
| Spindle bore | 26 mm |
| Spindle taper | MT4 |
| Spindle speed | 30–1600 r/min |
| Longitudinal feed | 0.025–0.250 mm/r |
| Cross feed | 0.0125–0.125 mm/r |
| Tailstock sleeve taper | MT3 |
| Motor | 750 W |
| Net / gross weight | 180 / 220 kg |
| Packing size | 1160 × 640 × 580 mm |
From a mechanical selection perspective, the TL250MV*500mm Variable Speed 26mm Spindle Bore Mini Metal Bench Lathe should be judged by how these details support the specific job. Hardened ways, bearing support, and the feed system are meaningful published features, but they do not remove the need to choose suitable cutting tools, mounting, lubrication, and operator practice. If a project depends on a particular tolerance, pitch, or material, ask the supplier to confirm the intended configuration and test conditions.








The TL250MV*500mm Variable Speed 26mm Spindle Bore Mini Metal Bench Lathe may be considered for manual turning and threading tasks within the stated dimensions and feed ranges. One practical example is a workshop that needs to compare short cylindrical parts against the 250 mm swing and 500 mm length before choosing a bench lathe. Another is a buyer reviewing whether the 26 mm bore and available workholding will suit the planned bar or tubular stock. These are selection examples, not a guarantee of suitability for every workpiece.
For threading, compare the requested pitch with the listed metric and inch ranges, then confirm gears, tooling, and setup. For turning, compare the part, chuck, and tool clearance as a complete assembly. Many machining issues attributed to a machine are actually influenced by clamping, tool condition, cutting parameters, or support for long and slender workpieces.
Listed standard accessories are a 3-jaw chuck, gears, wrench, and tool box. Listed optional accessories include low-voltage control; chuck and tool-post covers with micro switches; steady rest; follow rest; 4-jaw chuck with back plate; face plate; dial thread; work lamp; coolant system; stand and oil tray; special gears for inch threads; and turning tools with inserts. Optional items should not be assumed to be included. Confirm final scope, availability, electrical requirements, and shipping configuration with the supplier.
Read capacity figures together. The 250 mm swing over bed, 150 mm swing over cross slide, 130 mm cross-slide travel, and 60 mm tool-post stroke each affect clearance. Compare a drawing, sample part, and fixture sketch before ordering.
The 500 mm maximum workpiece length is another planning value rather than an automatic promise that every 500 mm part will be convenient to machine. The chuck grip, tailstock support, overhang, cutting load, and required tooling can change the practical arrangement. Where a long or slender component is involved, discuss support options such as the listed steady rest or follow rest. Where a faceplate or 4-jaw chuck is required, confirm the matching back plate and final accessory scope.
Before the first job, mount the machine on a stable bench or suitable stand, inspect the workholding, and make sure tools are secured. Keep the ways clean and follow the operating documentation for guards, speed selection, feed settings, and routine maintenance. The stated machine data supports comparison, but it does not replace a safe-work assessment by the operator. Electrical supply, workspace access, and lifting arrangements should be checked before delivery because the listed gross weight is 220 kg.
The TL250MV*500mm Variable Speed 26mm Spindle Bore Mini Metal Bench Lathe offers a documented combination of a compact manual format, a 26 mm spindle bore, variable speed, published feed and threading ranges, and specified construction features. For buyers who need a defined working envelope, the most useful next step is a fact-based comparison of their parts and setup against the published figures. Confirm all configuration details that are not explicitly stated here before purchasing.