product-tl360mx750mm--hot-sale-new-bench-lathe-machine-metal-lathe-with-ce, product-tl360mx750mm--hot-sale-new-bench-lathe-machine-metal-lathe-with-ce, /bench-lathe
Inquiry
product-tl360mx750mm--hot-sale-new-bench-lathe-machine-metal-lathe-with-ce, product-tl360mx750mm--hot-sale-new-bench-lathe-machine-metal-lathe-with-ce, 
Inquiry

TL360MX750mm Hot Sale New Bench Lathe Machine Metal Lathe With CE

Request a Quote
  • Overview

Overview

TL360MX750mm Hot Sale New Bench Lathe Machine Metal Lathe With CE

The supplied CJM360 (TL360M) information describes this machine as a manual bench lathe for evaluating general metalworking work. Treat the listing as an organized record of stated configuration, not as a replacement for an approved quotation, drawing, acceptance plan, or site plan. Before selecting equipment, compare the required part envelope, chucking method, tooling interfaces, and expected workload with the documented machine information.

Stated Machine Capacity

The source lists a maximum swing over bed of 360 mm and a maximum workpiece length of 600 mm or 750 mm. Swing over the middle carriage is listed as 240 mm. These figures provide an initial envelope for round work, repair components, prototype parts, and general turning tasks. They do not by themselves confirm clearance for a particular fixture, toolholder, or irregular workpiece. Before order release, compare the drawing, raw-stock dimensions, chuck arrangement, and tool path with the selected bed length.

The listed spindle bore is 40.5 mm, the spindle taper is MT5, and the tailstock taper is MT3. The stated tailstock stroke is 80 mm. These details matter when center work, drilling, boring support, or existing accessories are part of the planned process. Tooling and fixture compatibility should be confirmed in writing. In practice, a correct taper or capacity on paper does not remove the need to review the complete setup.

Construction and Operating Features

  • Precision-ground and hardened bed ways are stated in the supplied description.
  • The spindle is described as supported by precision roller bearings.
  • Headstock gears are described as high-quality steel, ground and hardened.
  • Speed-change levers are listed for operating-speed selection.
  • The published range includes 600 mm and 750 mm bed-length options.

From a mechanical viewpoint, the stated bed-way treatment, bearing support, and gear construction explain the intended manual-machine configuration. They are not a finished-part tolerance guarantee. Surface finish, repeatability, and cutting stability also depend on material, cutting tool, clamping, machine condition, maintenance, and operator practice. Many buyers focus only on a parameter table; however, actual workholding and process conditions can be just as important as the listed machine dimensions.

Spindle, Feed, and Threading Data

The supplied specification gives a 60–1600 rpm spindle-speed range across 12 steps. Choose an operating speed for the material, diameter, tool geometry, cutting condition, and safe working method. Higher rpm alone is not a selection rule. When turning a larger or more demanding workpiece, stability, tool condition, and the actual cut should determine the setting rather than a preference for the highest stated speed.

The published data lists 22 metric thread kinds with a 0.20–7 mm pitch range, 45 inch thread kinds with a 2.5–48 TPI range, 21 module thread kinds at 0.20–3.5 mm, and 31 diametral-pitch thread kinds at 8–120 TPI. Longitudinal feed is stated as 0.10–1.40 mm per revolution, while cross feed is stated as 0.045–0.60 mm per revolution. Confirm the needed thread standard, change gears, centers, and accessories before placing an order. These ranges are a planning reference; the complete process governs the practical result.

Specification Table

Specification Stated value
Model in supplied table CJM360 (TL360M)
Maximum swing over bed 360 mm
Maximum workpiece length 600/750 mm
Swing over middle carriage 240 mm
Spindle bore 40.5 mm
Spindle taper MT5
Tailstock taper MT3
Speed range 60–1600 rpm
Net/Gross weight 420/470 kg
Overall size 1580×785×750 mm
Packing size 1600×800×760 mm

Accessories and Configuration Review

The original description lists a 3-jaw chuck, dead center, chasing dial indicator, change gear set, splash guard, oil gun, toolbox, and tools as standard accessories. Listed optional items include a 4-jaw chuck, machine stand, face plate, steady rest, follow rest, live center, toolpost cover, chuck guard, and leadscrew guard. Availability and the exact delivery scope should be stated in the final order documentation.

Configuration can matter as much as headline capacity. A buyer working with longer, thin, heavy, or difficult-to-clamp components may require a different chuck, support rest, guard, or stand. Verify the part drawing, required threads, fixture approach, electrical supply, installation location, and desired accessories with the supplier. This neutral review approach helps prevent a general specification from being treated as a universal application promise.

Applications and Evaluation Guidance

Where the stated work envelope fits, this manual bench lathe can be considered for repair work, prototype turning, maintenance tasks, and general metalworking. It is appropriate to review each application against the actual component and process. If your project requires unusual part length, difficult clamping, high output, or a special tooling interface, request a documented configuration review rather than relying on a generic listing.

Site preparation is also part of the decision. Compare the published overall and packing dimensions with the floor area, lifting route, unloading equipment, electrical supply, and local installation conditions. The stated packing dimensions and weights can inform logistics planning, while freight method and commissioning arrangements require separate confirmation. This content is limited to the supplied product information and does not assign unverified standards, output, precision, or accessory compatibility.

Practical Pre-Order Checklist

For a useful technical confirmation, provide the supplier with the part drawing, material, raw-stock diameter and length, desired thread types, expected chuck or fixture arrangement, electrical supply, and delivery destination. Clarify whether a 3-jaw or 4-jaw chuck, stand, steady rest, follow rest, or protective guards are required. If repeat work is planned, ask how the stated capacities relate to the proposed components and tools. A documented reply allows the machine, accessories, transport requirements, and site conditions to be reviewed together before the order is released.

Also separate listed information from items that need confirmation. The source identifies CE in the product title, but applicable documentation should be requested for the intended destination. Likewise, packaging dimensions and gross weight help with freight planning, yet they do not determine unloading method, foundation requirements, or local electrical work. This careful approach is particularly useful where access routes are limited or where the operator must integrate existing tooling.

Request a Technical Confirmation

When requesting a quotation for the TL360MX750mm Hot Sale New Bench Lathe Machine Metal Lathe With CE, specify the required 600 mm or 750 mm bed option and the desired accessory package. Ask the supplier to confirm final model identification, tooling interfaces, electrical requirements, documentation, delivery scope, and any CE-related documents needed for the intended destination. A review based on verifiable details supports a more reliable purchase decision.

Machine Selection Notes

For procurement records, TL360MX750mm Hot Sale New Bench Lathe Machine Metal Lathe With CE should be evaluated against the stated capacity and selected accessories. A quotation for TL360MX750mm Hot Sale New Bench Lathe Machine Metal Lathe With CE should identify bed length, tooling interfaces, and delivery scope. When reviewing TL360MX750mm Hot Sale New Bench Lathe Machine Metal Lathe With CE, verify the workpiece drawing and electrical requirements with the supplier. The listed information for TL360MX750mm Hot Sale New Bench Lathe Machine Metal Lathe With CE is most useful when the actual turning operation, clamping approach, and site conditions are documented. For buyers comparing TL360MX750mm Hot Sale New Bench Lathe Machine Metal Lathe With CE with their existing workflow, confirm that the required accessories and operating conditions match the final order.

Original Product Images

CJM360 .png800_20220113_115014-1.jpg800-20220113_114337.jpg800_20220113_114918.jpg360 .jpgdetailed images.jpg800_packing.jpg(1)(1).jpg-800.jpg_01

TL360MX750mm Hot Sale New Bench Lathe Machine Metal Lathe With CE

Request a Quote

Featured Products

product tl360mx750mm  hot sale new bench lathe machine metal lathe with ce-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000