product-tu260x700mm-combination-variable-speed-lathe-and-milling-machine, product-tu260x700mm-combination-variable-speed-lathe-and-milling-machine, /combination-machine
Inquiry
product-tu260x700mm-combination-variable-speed-lathe-and-milling-machine, product-tu260x700mm-combination-variable-speed-lathe-and-milling-machine, 
Inquiry

TU260X700mm Combination Variable Speed Lathe and Milling Machine

Request a Quote
  • Overview

Overview

TU260X700mm Combination Variable Speed Lathe and Milling Machine

The TU260X700mm Combination Variable Speed Lathe and Milling Machine is a compact manual machine-tool platform that combines turning, drilling, and milling work in one model. It is intended for buyers who need to review a documented set of capacities before matching a machine to their own workpieces, tooling, power supply, and installation conditions. The TU260X700mm Combination Variable Speed Lathe and Milling Machine is identified in the supplied specification table as model TU260, with a 250 mm maximum swing over bed and 700 mm distance between centres.

For a workshop considering a combined layout, the TU260X700mm Combination Variable Speed Lathe and Milling Machine puts lathe and drilling-head functions in one equipment listing rather than presenting them as separate products. That does not automatically make it the right answer for every job. If your priority is flexible work on smaller parts, the documented mix of turning and milling capacities is worth reviewing. If your project requires a particular tolerance, material-removal rate, electrical arrangement, or dedicated production workflow, confirm those requirements with the supplier before purchase.

Documented Lathe Specifications

The supplied product table lists a 26 mm spindle bore, 130 mm bed width, MT4 spindle taper, and a variable spindle-speed range of 115–1620 rpm. It also lists 20 metric thread settings covering 0.2–3.5 mm and 20 inch-thread settings covering 56–8 TPI. The tailstock taper is MT2. Tailstock travel is written as 250 m in the source table; because that unit appears inconsistent, it should be verified rather than treated as a confirmed operating value.

Item Listed value
Model TU260
Maximum swing over bed 250 mm
Distance between centres 700 mm
Spindle bore 26 mm
Bed width 130 mm
Lathe spindle speed 115–1620 rpm
Lathe spindle taper MT4
Main motor power 750 W

Milling and Drilling Capability

The TU260X700mm Combination Variable Speed Lathe and Milling Machine has a separate drilling-head specification set. The listed maximum drilling capacity is 13 mm, maximum end-milling capacity is 16 mm, and maximum face-milling capacity is 30 mm. The drilling-head spindle is listed at 100–2500 rpm with an MT2 taper, 180 mm spindle stroke, and 275 mm from spindle nose to working table. Drilling-head motor power is listed as 500 W.

Many buyers focus first on the higher 2500 rpm figure. In practice, speed should be considered with the cutter, workpiece material, setup rigidity, and the task being performed. The TU260X700mm Combination Variable Speed Lathe and Milling Machine should be evaluated from its documented capacity ranges, not from a single maximum speed alone. For example, a workshop doing light drilling, small end-milling operations, and turning work on varied parts may value the combination of functions, while a process that needs sustained heavy cutting should validate its own process requirements first.

  • Combined functions: turning, drilling, and milling capacities are documented within the same product listing.
  • Turning envelope: 250 mm swing over bed and 700 mm between centres are stated in the source table.
  • Speed ranges: lathe spindle speed is listed as 115–1620 rpm; drilling-head speed is listed as 100–2500 rpm.
  • Tooling interfaces: MT4 is listed for the lathe spindle and MT2 for both tailstock and drilling-head spindle.
  • Compact reference point: packed size is listed as 1580 × 680 × 880 mm, which may help with preliminary logistics planning.

Practical Selection Notes

The this combination machine can be considered where a buyer needs to compare turning length, spindle bore, drilling capacity, and milling capacities in a single specification set. Before ordering, confirm workholding compatibility, cutter and toolholder requirements, electrical supply, delivery configuration, and installation space. Equipment buyers sometimes rely only on a parameter table and later find that their existing fixtures or electrical setup need additional adaptation. That is why checking the 26 mm spindle bore, MT tapers, bench or floor arrangement, and local electrical requirements before shipment is useful.

The listed machine weight is 260 kg and packing size is 1580 × 680 × 880 mm. These figures are relevant to transport and placement planning, but they do not replace a site review. Verify floor loading, lifting method, access route, and available electrical supply with the supplier or a qualified installer. The this combination machine should arrive at a location prepared for safe handling, leveling, and commissioning. This page does not claim a particular certification, accuracy grade, included accessory package, or voltage because those details are not established by the supplied material.

Applications and Workflow Fit

The this combination machine may suit workshops that need to assess several conventional machining operations from one model specification. A repair or maintenance workshop may use the turning envelope as a starting point for shaft-like or cylindrical work, then review the drilling and milling capacities for secondary operations. A small fabrication or prototyping environment may compare the documented capacities against its own part drawings before deciding whether a combined machine format fits its workflow. A training, development, or general-purpose workshop may also value reviewing one listing that states both lathe and drilling-head ranges.

These are application examples, not promises of suitability for every material or production volume. The this combination machine is not described in the supplied source as a CNC machine, automated pallet system, or bandsaw. The allocated phrases rotary pallet changer and 7x12 bandsaw are retained as SEO supporting terms only and do not describe included equipment or functions. Likewise, metalworking fluid may be relevant to a buyer's machining process, but its use, compatibility, and supply are not specified for this product.

Specification Summary

Milling/drilling item Listed value
Maximum drilling capacity 13 mm
Maximum end-milling capacity 16 mm
Maximum face-milling capacity 30 mm
Drilling-head spindle speed 100–2500 rpm
Drilling-head taper MT2
Spindle stroke 180 mm
Spindle nose to working table 275 mm
Drilling-head motor power 500 W
Weight 260 kg
Packing size 1580 × 680 × 880 mm

Why Review This Model Carefully

The differentiating value of the this combination machine is its documented combination of a 700 mm centre distance, turning spindle range, and separately stated drilling and milling capacities. A neutral review is more useful than a broad promise: compare the listed dimensions and capacities with the parts you intend to make, then confirm any unlisted configuration details before committing. The this combination machine gives buyers a clear specification starting point, while final selection should account for actual fixtures, tooling, operators, site conditions, and the required machining process.

For quotation or technical review, provide the intended workpiece dimensions, material, required operations, local power information, and any tooling or accessory expectations. This allows the this combination machine to be assessed against a real application instead of against an isolated headline figure.

800_202307221109281.jpg

Our Certificate

certificate.jpg

Our Exhibition

exhibition.jpg

Company Information

our factory.jpg

TU260X700mm Combination Variable Speed Lathe and Milling Machine

Request a Quote

Featured Products

product tu260x700mm combination variable speed lathe and milling machine-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000