product-tu290-combination-variable-speed-lathe-and-milling-machine-3-in-1-lathe, product-tu290-combination-variable-speed-lathe-and-milling-machine-3-in-1-lathe, /combination-machine
EN
The TU290 Combination Variable Speed Lathe and Milling Machine 3 in 1 Lathe brings turning, milling, drilling and threading into one workshop machine. It is intended for users who need to move between common machining operations without planning a separate machine for every task. The supplied specification table identifies the TU290 as the larger model in the comparison and provides the values used below.
For a workshop considering this combination machine, the practical question is not simply whether a combination machine has more functions. It is whether its capacity, workholding plan, electrical supply and available floor space match the jobs to be performed. This page therefore focuses on the stated TU290 specifications and on selection checks that can be confirmed before purchase.
The machine is described for turning, milling, drilling and threading. A combined layout can be useful where a part needs more than one of these processes and where a compact equipment plan is preferred. The original description also states that metric or imperial thread cutting is available and that the machine is suitable for processing metal, wood and other materials.
Speed range is useful only when considered with the material, tool, diameter and cutting method. A higher displayed speed is not automatically better for every job; tooling, workholding and the intended process still need to be evaluated together. For that reason, the machine should be matched to actual workpieces rather than selected from speed figures alone.
| Specification | TU290 value |
|---|---|
| Distance between centres | 700 mm |
| Swing over bed | 290 mm |
| Swing over cross slide | 165 mm |
| Lathe spindle taper | MT5 |
| Bed width | 180 mm |
| Lathe spindle bore | 38 mm |
| Lathe spindle speed | 80–2000 rpm |
| Cross-feed range | 0.01–0.10 mm/r |
| Longitudinal-feed range | 0.085–0.832 mm/rev |
| Top-slide travel | 70 mm |
| Cross-slide travel | 160 mm |
| Tailstock quill travel / taper | 70 mm / MT3 |
| Main motor | 1.5 kW |
| Drilling and milling head | BF20 |
| Milling spindle taper / travel | MT3 / 52 mm |
| Milling spindle speed | 50–2250 rpm |
| Maximum spindle nose to table distance | 325 mm |
| Maximum spindle to column distance | 185 mm |
| Milling motor power | 600 W |
| Machine packing size | 1450 × 720 × 1050 mm |
| Stand packing size | 800 × 580 × 415 mm |
| Net weight | 325 kg |
These values are presented for the TU290 column only. If a purchase decision depends on an attachment, an accessory, a tooling interface or a particular material result, confirm that item with the supplier before ordering. A specification table is a useful starting point, but it does not replace checking the planned workpiece, fixture and cutting tool together.
The TU290 Combination Variable Speed Lathe and Milling Machine 3 in 1 Lathe can be considered for general workshop tasks that combine round-part turning with drilling, milling or thread-cutting steps. For example, a workshop may turn a cylindrical component, drill a feature, and complete a light milling operation as part of the same job flow. The machine is also described for metal, wood and other materials; actual suitability depends on the material, tooling and process parameters selected by the operator.
Another relevant scenario is a workshop that values multiple functions in one machine footprint. That does not mean every large or production-intensive application should use a combination platform. Buyers should compare part size, required rigidity, run time, tolerance needs and setup frequency with the stated TU290 capacities. If a project requires a capability not documented on this page, it should be treated as a question for pre-purchase confirmation rather than as an included feature.
Before installation, check floor loading, access route, machine location, ventilation and local electrical requirements. The packing sizes and net weight help plan handling, but they are not a substitute for an installation plan. Confirm the delivered configuration, power requirements and any local safety obligations with the supplier.
A useful evaluation sequence is to start with the largest workpiece: compare its length with the 700 mm distance between centres and its diameter with the stated swing values. Then review the required threads, feed ranges, spindle taper, milling clearances and workholding. This approach is more reliable than choosing only from a headline feature list.
For this machine, buyers can also prepare a simple application list: material, part dimensions, turning operation, milling or drilling operation, thread specification, toolholders, fixtures and expected production rhythm. This list makes it easier to verify compatibility before shipment. It also helps the buyer compare the planned job sequence with the available setup time, operator experience and inspection method before finalising a configuration. Keep the written confirmation with the order record so the agreed configuration can be checked again when the machine is received and prepared for use. In particular, confirm that existing chucks, toolholders, fixtures and tailstock-related accessories are compatible with the stated MT5 lathe spindle, MT3 tailstock quill and MT3 milling spindle arrangements.
The original product content notes standard accessories, but the detailed accessory contents are shown as an image rather than a text list. Confirm the exact included accessories and any optional items before placing an order. This is especially important when the planned application depends on a specific workholding or cutting setup.
The following original product images are retained as part of the source description.

This is a combined machine option for turning, milling, drilling and threading requirements within the stated specifications. Share the workpiece drawing, material, dimensions, thread requirement and required accessories with the supplier to confirm the appropriate configuration before purchase.