product-wm210vtl210vl-distance-between-centers-800mm-precision-metal-mini-lathe, product-wm210vtl210vl-distance-between-centers-800mm-precision-metal-mini-lathe, /bench-lathe
EN
The WM210V(TL210VL) Distance Between Centers 800mm Precision Metal Mini Lathe is configured for small-part turning work where documented capacity, speed control, and threading options need to be reviewed together. Its 800 mm distance between centers gives the operator room for workpieces that require more length than compact bench lathes typically accommodate. The supplied specifications support a clear fit assessment.
Many buyers begin by comparing motor output or maximum spindle speed. Those values matter, but they do not replace a review of swing, spindle bore, tailstock arrangement, carriage travel, and the thread range required by the job. For the WM210V(TL210VL) Distance Between Centers 800mm Precision Metal Mini Lathe, the documented combination includes a 210 mm swing over bed, 134 mm swing over cross slide, 38 mm spindle bore, MT5 spindle taper, and MT2 tailstock taper. If your priority is a longer between-centers capacity for suitable workpieces, review the full setup and the operating manual before purchase and use.
This WM210V(TL210VL) Distance Between Centers 800mm Precision Metal Mini Lathe uses a variable spindle-speed arrangement listed at 50–2500 r.p.m. The existing product material also identifies a hardened bed way, precision roller bearing for the spindle, and ground and hardened steel gears inside the headstock. Results depend on setup, tooling, workholding, operator method, maintenance, and the workpiece.
| Specification | Documented value |
|---|---|
| Swing over bed | 210 mm |
| Swing over cross slide | 134 mm |
| Distance between centers | 800 mm |
| Bed width | 100 mm |
| Spindle bore | 38 mm |
| Spindle taper | MT5 |
| Spindle speed | Variable, 50–2500 r.p.m. |
| Metric threads | 10 settings, 0.3–3 mm |
| Imperial threads | 8 settings, 10–44 T.P.I. |
| Tool post | 4-way |
| Compound slide travel | 55 mm |
| Carriage slide travel | 75 mm |
| Carriage travel | 376 mm |
| Tailstock spindle travel | 60 mm |
| Main motor | 850 W brushless motor |
| Weight | 85 kg |
| Packing size | 1200 × 450 × 450 mm |
The listed 50–2500 r.p.m. spindle-speed range allows the operator to select speed within the documented range. Speed selection should be made with the workpiece material, diameter, cutting tool, operation, and machine instructions in mind. The supplied description notes that spindle speed can be adjusted variably and read easily. It does not establish a universal setting for a particular material, so use the manufacturer instructions and appropriate machining practice.
The WM210V(TL210VL) Distance Between Centers 800mm Precision Metal Mini Lathe is described as having thread-cutting capability. The supplied specification table lists ten metric settings from 0.3 to 3 mm and eight imperial settings from 10 to 44 T.P.I. Change gears are listed among the standard accessories. Confirm the required pitch, gear arrangement, tooling, and setup procedure against the applicable manual before beginning a threading operation.
The original material lists a precision roller bearing for the spindle, a hardened bed way, and ground and hardened steel gears inside the headstock. These features describe the machine configuration supplied in the product material. Assess them with alignment, lubrication, installation, and routine care.
A four-way tool post is listed for the machine. The documented compound slide travel is 55 mm, carriage slide travel is 75 mm, and maximum carriage travel is 376 mm. These figures help an operator review whether the machine layout fits planned operations. They do not replace a complete check of tool clearance, chuck selection, workholding, tailstock support, and guard position for an individual job.
The WM210V(TL210VL) Distance Between Centers 800mm Precision Metal Mini Lathe may be considered for workshop turning tasks involving small parts and for thread-cutting work that falls within the listed metric or imperial ranges. It can also be reviewed for projects that need the documented 800 mm distance between centers. If a project requires a different capacity, accessory, voltage configuration, or process capability, confirm those requirements with the seller before ordering rather than inferring them from a related model or image.
For a buyer comparing options, begin with the workpiece envelope: the listed swing over bed is 210 mm and the distance between centers is 800 mm. Next, check the required spindle passage against the 38 mm bore and the required taper against the listed MT5 spindle and MT2 tailstock. Then review the thread range, travel figures, accessory requirements, and the space needed for installation. This order is more useful than choosing from a headline claim alone, especially when workshop conditions vary.
The existing material lists a speed display, 100 mm three-jaw chuck, splash guard, chip tray, safety chuck guard, dead centers, change gear kits, and operating tools as standard accessories. It separately lists a 100 mm four-jaw chuck, backplate, follow rest, steady rest, face plate, stand, live center MT2, turning tools, and quick-change tool post as optional accessories. Package contents and optional availability should be confirmed at the time of inquiry because the list distinguishes standard and optional items.
The product imagery includes a safety notice. Read the operator instruction manual before operating the WM210V(TL210VL) Distance Between Centers 800mm Precision Metal Mini Lathe. Use suitable eye protection, keep guards in place, secure the workpiece and tooling, and avoid loose clothing or gloves around rotating equipment. Verify machine condition and controls before use. These points are general safety reminders and do not replace the supplied manual, workplace procedures, local requirements, or trained supervision.
For best selection results, send the intended workpiece size, material, required thread pitch, tooling plan, and desired accessories with your inquiry. This makes it easier to check the documented WM210V(TL210VL) Distance Between Centers 800mm Precision Metal Mini Lathe configuration against the actual task without making unsupported assumptions.
For planning, record the stock length, finished diameter, material grade, required features, thread pitch, tooling, chuck arrangement, support method, measurement sequence, and operator training requirements before confirming this documented configuration safely suits intended operation.







